ATSC 3.0 Channels Missing?
-
AZ Jaybird
- Posts: 2
- Joined: Thu Feb 29, 2024 8:58 pm
ATSC 3.0 Channels Missing?
While there have been six ATSC 3.0 channels shown in my HDHomeRun detected channel list for months, they are no longer showing up when I rescanned my Flex 4K this morning after installing EAS Capture app? I’m in Northern AZ and looking at Cottonwood repeaters. My Flex is running the Nov 7th version of firmware. Are others experiencing a similar issue, or is this market specific in advance of today’s National EAS test?
Re: ATSC 3.0 Channels Missing?
I don't believe there have ever been ATSC 3.0 broadcasts anywhere in Northern AZ. Scripps has 2 translators on Mingus Mountain, one that has always been KNXV and one that used to be KASW but switched to a duplicate of KNXV when KASW started broadcasting in 3.0. It is possible that tropospheric ducting might have brought enough signal in from Phoenix to be able to scan the channels; it's a lot more likely with 3.0 since the low-level signalling data is transmitted in a way that can be received with a much worse signal than the audio and video data.
-
AZ Jaybird
- Posts: 2
- Joined: Thu Feb 29, 2024 8:58 pm
Re: ATSC 3.0 Channels Missing?
Thanks for the reply. Although the Flex re-detected the ATSC 3.0 programs after the EAS test completed today, your suggestion explains the situation.
The channel 27 RF signal from Phoenix lists the ATSC3.0 programs detected by the Flex. With the transmitter’s 445KW ERP Ch 27’s contour (according to Signal GH) extends to ~10 miles south of us. Since attempting to tune the ATSC 3.0 programs always result in the same content protection error message, it’s probably not a concern until they add 3.0 transmissions up here.
The channel 27 RF signal from Phoenix lists the ATSC3.0 programs detected by the Flex. With the transmitter’s 445KW ERP Ch 27’s contour (according to Signal GH) extends to ~10 miles south of us. Since attempting to tune the ATSC 3.0 programs always result in the same content protection error message, it’s probably not a concern until they add 3.0 transmissions up here.