Only thing that currently records drm protected channels would be wmc on win 7/8 which requires the same pc or extender to play... SD is working on recording DRM channels with but it may be quite some time before such is ready (see https://forum.silicondust.com/forum/viewtopic.php?f=131&t=73199 ) Re...

Seems like the Scribe 4K is getting here 4-6 months before I expected (blind guessing at but after being here in the forum for 13+ years I think I tend to understand how some things at SD work including an "expected" announcement this/next week). Personally for me the "4K" units have been far more s...

Can't really offer that much help for a Moto area... Cox switched the TAs in the cisco markets to DSG mode so they essentially now work the same as the STBs in how they request channels and ever since never had an issue with a scan. For such a difference the two main things to check is TA and Card V...

Can someone post the program numbers for each channel? In the HDHomeRun Config GUI, they appear at the left side of the drop-down where you choose the program. I expect they're in the 5000 range. - Trip Quoting you so the request doesn't get lost on the next page for those that view in chronologica...

I would post your DeviceID as it is possible that looking up by IP didn't give the correct device and/or you have multiple devices (I have seen such make the app/dvr not aware of which one it is as there can be only one with the same virtual channel number and if one device is configured one way it ...

You should read through the ATSC 3.0 Forum on this site. It's not very pretty. However, if you buy now you WILL have 2 ATSC 1.0 tuners that work fine. Hopefully, by the time that you have ATSC 3.0 service in your area, SD will have the bugs worked out of the new Quatro 4K. That is partially false/m...

Where are you saving the recordings? How is the drive connected? What filesystem is the drive formatted as (NTFS, exFAT, etc)? Keep in mind the engine can't reliably handle a remote share as you will encounter limitations like you described after getting to so many files/directories and that the dri...

For some reason the latest version of the app that Amazon is pushing out is corrupted, right now to fix you must sideload the "real" app.

see viewtopic.php?f=119&t=74851

but that may not solve OP's original problem.

Double check the card is properly validated. It isn't uncommon on such changes that things get pushed out that mess up the pairing. You have been lucky to not have DRM as cox usually has DRM on "everything" but locals. If it is DRM protected, the scan does need to indicate such for any of SD's apps ...

Usually it is even better connecting to an unmanaged switch than ever connecting a HDHomeRun directly to the router (just make sure the switch is connected to the router by some means so the tuner and nas can communicate with SD).

If they ever say anything about seeing it just fine, YELL AT THEM and say get me someone who knows something about CableCARDS as you (CSR) are not possibly EVER able to see anything as they are one way only devices. (I am kidding about yelling, try to be polite, but nothing irritates me more on a ca...

I am seeing all of the new channels on my roku tv (TCL 75R615), but I'm not getting audio. The TV is connected to a Dolby Atmos capable receiver via ARC hdmi. Tried a few different audio settings with no change. Tried my other roku tv (TCL 55S525), which is not connected to an audio receiver and it...

Have you set up a static port in the service in the config? One of those ports you can configure (tcp) as it is what is used to communicate with the engine. The 65001 port is what is used for discovery (the target when the engine discovers as well as a port the engine responds to for it to be discov...

They most likely will need your DeviceID and possibly channel number. If you are seeing a guide issue in the HDHomeRun app please create a new thread in this forum (or file a trouble ticket) and we will help. Please post the Device ID of your HDHomeRun, your location, the channel number, the channel...

Typically it will record on the one with the most space. Only control you have is setting the RecordStreamsMax which limits how many streams it can record at once and if you wish an archive, you can set such to 0 to not record anything (some versions of the engine may still use such for live but hav...