Log data is coming in, there just aren't any communication errors reported in it. Can you provide a specific time?

That would not be helpful as it would still require the same implementation as any other Android device.

I am not seeing any occurrences since you enabled the sending of data.

Listings have been added for those channels.

Maybe now they'll fix their screwed up audio just in time for no one to be able to hear it.

Have you swapped the coax cable between the CONNECT Quatro and one of the other devices just to rule out a splitter or cable issue?

Please open a trouble ticket.

https://www.silicondust.com/support/trouble-ticket/

Once UDP streaming has started, it will stop if the target is unset, the channel is unset (set to 0 if using the GUI), or it receives an ICMP bounceback because the port is closed. If a firewall is running and is set to just drop traffic that doesn't match an allowed incoming rule, no rejection will ...

33.x broadcasts on low VHF channel 3. You're doing well to be able to receive it at all, as that antenna is not designed to receive low VHF. You can consider replacing the antenna with something much larger that can receive low VHF more reliably, but also be aware that most of the channels that are ...

We would like to get some diagnostic data to see what is happening:

In a web browser go to http://hdhomerun.local
NOTE: That address will go do the first HDHomeRun device found on your network. If you have more than one HDHomeRun device, use the "device ID" printed on the bottom of the unit ...

Thanks, this seems to work on my iPad with live tv but on recordings I can turn them on but when I turn them off it crashes the app. On my iPhone 12 on both live tv and recordings I can turn them on but it crashes when I turn them off.

Please check the app store and make sure you have the latest ...

Updated again with an extra level of "ignore what you think this should be and do what I say".

You have no devices associated with the account under the email address that is your username.

For TECH devices, you first have to explicitly enable guide access on the device's web page and make sure the devices are allowed to connect out to our guide server. It doesn't need any port forwarding ...

16.2 and 16.4 updated.

Is the app tuning to a channel that has signal if you watch it on another device?