they deprecated the use of using "my." for the api years ago but until recently "my." did properly redirect to the new subdomain for the api. You might figure it out if you look at what the other apis use for the dvr/app, I won't publicly post such as guide isn't supposed to be public because of the ...

It's been a banned word for many years as industries SD needs to work with can't distinguish between the great legal software offering and the "synonymous" illegal boxes.

First thing i would double check is your dvr subscription is valid as guide data download depends on that.

Also note some may ...

I'm having a similar issue.

Roku Ultra - 4850X
Software Version: 14.6.4
Build: 9915

HDHomeRun 101AFD95 DUAL

Works on Windows 10 and Android

I get a cycle of "Can't find device" with a quick flash to "Error 228"


Most likely different issue as I believe roku requires modern devices and http ...

If I'm reading it right it seams your record engine is from 2017 and nickk had said such would no longer work. See https://forum.silicondust.com/forum/viewtopic.php?p=404903#p404903

Or https://forum.silicondust.com/forum/viewtopic.php?t=79943 with a bit more detail on where the cutoff date of ...

Hsc has nothing to do with which codec they use but they may bring more channels to h.264 as they have less physical video channels to work with so rather than 4 streams on a physical channel they can now pack in 8. The prime doesn't care what codec it is.... your client might, but I can't think of ...

A regular 3 way or a balanced 3 way splitter?

It sounds to me that you may be using a regular 3 way and are overpowering the quatro.

Unless you were on extremely old firmware (>2years) or something else changed in you internet setup regarding ipv6 (even from your isp) there shouldn't be any such issue. Though I could be wrong, I don't think the k addon ever supported the discovery from https://ipv6-api.hdhomerun.com/discover when ...

Traditionally a cablecard and ta require oob to be between around 70-130Mhz... with high split, they will be using up to 204Mhz for internet upstream so there won't be an oob for the cablecard to get anything to work.

The HSC provides an oob the cablecard can use it has nothing to do with channels ...

What drive and if it was a bare drive that you provided enclosure/dock, what enclosure/dock.

First off it only supports the first 18TB so it probably shouldn't be larger than that. I believe there is also a requirement that it only works on the first partition and I've seen a few drives that hadn't ...

make sure you post what app version you are on (I doubt firetv app store is on the latest as it usually takes several more days than google play store but you may have sideloaded latest). Just the other day both were pulling in 0603... google finally gave me 0606 on Thursday night and I was able to ...

Make sure you are connecting from the correct subnet. My suggestion would be from a PC rather than phone. I also personally always perform the scan directly on the device's web page... that link should have worked assuming that is your Scribe's DeviceID but some don't have mdns available on their ...

Firmware or app... the device should have had its firmware updated over a month ago... though some have reported some issues right after that as firmware issues, there haven't been enough to really say it was firmware (we would be seeing many reports each day here if that were the case)... many ...

I didn't have time to really look at your script or try to run it (on phone on a bus at the moment) but typically in windows i believe such would be $null (such as >$null ) and i think in the case of invoke web request there is also an out-null available.

Since kyl416 stated rabbitears has some incorrect information I can't say for sure but from rabbitears it looks like nearly all the display channels for woms has the same 29.1 number. And the way the modern method of tuning works for the scan as well as many tv's it may not add the additional 29.1's ...

Laat two posts seem to be a different issue than what this thread was originally about.

There was a recent issue with a recent android release related to whether or not the client device had native ac4 support rather than the cloud transcoding service (not sure of your phone but the chromecast and ...