New beta firmware issue

[Justin.U]

I was finally able to do the firmware update now since I did it my channels on ATSC 3.0 is Frozen On One frame it doesn't move or anything it turns into it with no audio just freezes on one frame it's like it's stuck on a commercial. Can you please fix the issue so I can watch ATSC 3.0. send diagnostic is turned on and ran a whole new channel scan and tuned into the channel and tried to watch it for a few minutes and nothing it was just froze on a picture one frame no nothing you know audio or video movement.

http://10A49453.local

http://10A515F8.local

[jasonl]

Is this happening on all the ATSC 3.0 channels?

Is it happening on multiple different viewing devices or just a specific one?

If you tune a channel, see the frozen frame, go to a different channel, then back to the first one, is it still the same frame as before or is it a different frame?

[Justin.U]

It's happening on all the ones that are not DRM and it happens across all my devices when I tune into any of them I tried on my iPad I tried on my Samsung phone I tried on my on box any device that I own I cannot tune into them it's just froze on one frame on each Channel. I can switch to ATSC 3.0 but they all have different frames per Channel but if you go back to one you recently previewed it is the same Freeze Frame it's been stuck on that for a couple hours now. Ever since I did this stupid firmware update. they're not all on the same freeze but they don't play at all they just come in with that theme on the frame that is frozen. But I can tune into any 1.0 with no problem and they play in have picture and sound

[Justin.U]

I can see that the issue hasn't been fixed on ATSC 3.0 still can't tune into those channels because the frames are frozen on all the channels not including the ones that are DRM because you can't tune into them. I hope you get it fixed or I can watch those channels.

[jasonl]

So if you go into a channel today, it is showing the same frozen frame that same channel was showing on Thursday?

If you reboot the HDHomeRun and try again, is it still that same frame?

[Justin.U]

I went into the channel twice today the three different channels that are not DRM and I see the same free screen on them as I did Thursday nothing has changed you can't watch them. Ever since I did the new beta firmware that's what happened with those channels now they're just showing frozen frame. Since Thursday it's the same one I did reboot the app and unplugged my HD home runs and nothing is fixing them.

Yes if I reboot and same frozen frame since Thursday on the three channels that are not DRM

[nickk]

Can you please save a 60s format=dbg capture by clicking on this link:
http://10A515F8.local:5004/auto/v111.1? ... uration=60

Please upload it to a drive share such such as Google Drive and PM me the share link.

[Justin.U]

Okay I will do it as soon as I'm able to and get it sent to you

[jasonl]

Sure sounds like the encoder is no longer being fed with the various video streams and is just sending out a continuous stream of the last frame it received on each channel. Debug capture will confirm though.

[Justin.U]

I just checked them out now and it seems like they're all playing now just fine did you guys do something because they weren't playing this morning now when I was able and just got home around 7:30 they all been playing and they're still playing now there is no the video and audio are all back on all the three channels that are not DRM so did you guys change anything or fix the problem

[nickk]

I agree with Jason - most likely a broadcast problem that the station fixed. We have seen this happen before where the input stage of the encoder at the broadcaster stops accepting new frames from SDI and repeats a still image.

[Jetlight]

I am having the same problem as the first poster. The image is frozen on the only nexgen channel I get. Please help

[Jetlight]

10710e1

Yesterday my atsc 3.0 channels went out also i submitted a ticket. No reply yet.

[Justin.U]

I still have the same problem in the don't want to do anything to fix it. That's what I'm gathering here and still can't watch any of my channels because it seems odd that I only get the signal from 10:00 a.m. to about 6:00 then they go out the signal shouldn't go out at a certain time I should be able to receive it all day long. I hope HD home run fixes this problem soon. Otherwise I'm going to look elsewhere for a DVR. I've been with HD home run for since 2022 and I really like their product and DVR and would hate to give them up. But I'm not going to keep a device that I can't use. And they don't want to resolve the issue.

[oaks37]

Some of you might do well to find the thread for your area on avsforum and ask there if others in that region are having freeze frame problems on certain channels (probably a broadcaster issue) or night time reception problems (probably a tropo/weather reception issue.)

https://www.avsforum.com/forums/local-h ... eption.45/