Can't record on a Flex 4K from tuners on a Connect Quatro

Help and support for HDHomeRun Tuners, HDHomeRun DVR, and HDHomeRun software for Windows, Mac, Android, XBox, etc.
Post Reply
Cabal
Posts: 379
Joined: Mon Jun 09, 2014 1:53 pm
x 75

Can't record on a Flex 4K from tuners on a Connect Quatro

Post by Cabal »

I noticed today that I'm losing recordings (i.e. they don't start) of college football. I'm currently running a test with 4 recordings taking place on a Flex 4K with USB SSD attached. I can start viewing a channel on a Connect Quatro, and I don't get any errors when I try to record a live program, but the recording only gets added to Tasks list and never shows up on disk. I've tried a couple times now on channels 18.1 and then 14.1. Diagnostic info has been turned on on both devices:

HDFX-4K: 10A4C0B0
HDHR5-4US: 1077341E

I believe this is supposed to work, as I think I've done it before, and your FAQ says: "FLEX and SCRIBE models can act as DVR storage for other supported HDHomeRun tuner models"

I checked the systems logs for both units and don't see anything unusual.

Thanks.

NedS
Silicondust
Posts: 3609
Joined: Mon Dec 10, 2018 12:38 pm
x 147

Re: Can't record on a Flex 4K from tuners on a Connect Quatro

Post by NedS »

The FLEX will only do four recordings at once. It can record from its own tuners or from other tuners, but it will still be limited to four. Other DVR storage devices (PC, Mac, Linux) can handle more (defaulting to 16 each), and you can have additional FLEX units (4 each), and combine any number of those that your network can handle.

Cabal
Posts: 379
Joined: Mon Jun 09, 2014 1:53 pm
x 75

Re: Can't record on a Flex 4K from tuners on a Connect Quatro

Post by Cabal »

NedS wrote: Sat Nov 21, 2026 8:37 pm The FLEX will only do four recordings at once. It can record from its own tuners or from other tuners, but it will still be limited to four. Other DVR storage devices (PC, Mac, Linux) can handle more (defaulting to 16 each), and you can have additional FLEX units (4 each), and combine any number of those that your network can handle.
Thanks. That was not clear to me from reading the documentation. I see the references to 16 default streams in the Advanced section, but wasn't aware of the limitations on the FLEX unit, obviously.

I was previously running both devices with a Linux DVR and no attached USB storage. I will revise my configuration.

Post Reply