20261107 - lost all ATSC3 and some ATSC1

Help and support for HDHomeRun Tuners, HDHomeRun DVR, and HDHomeRun software for Windows, Mac, Android, XBox, etc.
Post Reply
MintBerry
Posts: 10
Joined: Sat Feb 08, 2025 11:04 am

20261107 - lost all ATSC3 and some ATSC1

Post by MintBerry »

Flex 4k
Just did this firmware update hoping it would help with the intermittent 503 errors and slow launches on ATSC3 channels but on the scan after it can't find them now. It also lost some ATSC1 channels too.
If there is no way to roll back can we get a beta release to upgrade to until this is resolved please?

I don't think I am alone: https://www.reddit.com/r/hdhomerun/comm ... xjfryf04l/
Last edited by MintBerry on Thu Nov 12, 2026 3:06 pm, edited 1 time in total.

MintBerry
Posts: 10
Joined: Sat Feb 08, 2025 11:04 am

Re: 20261107 - lost all ATSC3 and some ATSC1

Post by MintBerry »

It's really hard to rule out a coincidence without the ability to roll back the firmware.
"Could the ATSC3 lighthouse be down? It has gone down twice that I know of before. But wait, I normally see ATSC3 channels from 3 markets and now I see none. Gotta be firmware then... Oh wait, could my market's tower be offline and I'm not seeing the other markets because the wind is super high today and they were already marginal before? Wait, could my booster have died? Let me see if the ATSC1 channels look normal. Oh great, some are normal and one lower than usual. Is that the wind? A firmware change in SS feedback?"

It would be so nice to A/B test with the old firmware. If I had no issues on old firmware I wouldn't be tempted to go start diagnosing more deeply.
I really don't know where to go from here, based on other users seeing it too I will resist the urge to poke around my setup. Everything has been perfect other than the occasional 503 errors on atsc3 launches. Could be that my booster died or my Flex 4k ATSC3 tuners died between yesterday and today and I just happened to decide to update today?

I will be happy to get you data from WXII in the emergency test if my setup is able to get atsc3 again by then. It is a Hearst station in northern NC and it went to DRM very early on.

NedS
Silicondust
Posts: 3606
Joined: Mon Dec 10, 2018 12:38 pm
x 150

Re: 20261107 - lost all ATSC3 and some ATSC1

Post by NedS »

We would like to get some diagnostic data:
  1. Please go to http://hdhomerun.local
  2. If it tells you that a firmware update is available, please install it
  3. Click System Status
  4. Check the Send diagnostic information box
  5. Go back one page
  6. Click Channel Lineup
  7. Click on Detect Channels

Reply back to this post and provide us the device ID of your HDHomeRun and we will check the logs. You can find the device ID on a label on the bottom of the HDHomeRun itself.

MintBerry
Posts: 10
Joined: Sat Feb 08, 2025 11:04 am

Re: 20261107 - lost all ATSC3 and some ATSC1

Post by MintBerry »

Thank you! Today the ATSC3 channels in my market are scanning in. My signal for that tower is very strong so it wouldn't be the weather. Maybe the tower wasn't transmitting yesterday but that doesn't explain why I scanned in Charlotte and Raleigh ATSC3 channels before and now I'm not, after the firmware update.
Device ID 10A10E81
Last edited by MintBerry on Fri Nov 13, 2026 12:13 pm, edited 1 time in total.

MintBerry
Posts: 10
Joined: Sat Feb 08, 2025 11:04 am

Re: 20261107 - lost all ATSC3 and some ATSC1

Post by MintBerry »

Bold is tl/dr

Firmware: 20261107

Aside from looking at the diagnostic data I submitted from the device, I'd be willing to help get you data from WMYV (the lighthouse) if it would help in any way. I have been using scripts to test the 503 errors that plague my atsc3 channel launches.
WMYV’s RF 28 carries 108.1 WGHP, 112.1 WXII (DRM), 145.1 WXLV, 148.1 WMYV.
These channels have always returned 503 (807 No Video Data) on 25% of first tune requests. 20261107 didn't help. If they get video, it is in about 3 seconds otherwise it won't come before the 10s HDHR timeout. That's about 6s of waiting for something that has never come in my testing.
The failure rate changes over minutes, not request by request. There are runs of several minutes where nearly every request fails, separated by clean stretches of 1–3 minutes where everything works on the first try. Both tuners fail within the same window of time.

This data has helped me because now I know that a 4 second timeout is ideal since there is no need to wait longer. That gets 3 attempts in 12 seconds and I get video before my client times out and gives up now.

cyberhiker
Posts: 5
Joined: Mon Jan 07, 2008 9:10 pm
x 1

Re: 20261107 - lost all ATSC3 and some ATSC1

Post by cyberhiker »

Similar issue here... a rescan after the f/w update returns only ~50% of the channels it had before the f/w update (33 down to 15). My TV (on the same antenna) is still seeing the original channel lineup (I just rescanned there to confirm and get 23 channels + 10 'nextgen tv' channels).

MintBerry
Posts: 10
Joined: Sat Feb 08, 2025 11:04 am

Re: 20261107 - lost all ATSC3 and some ATSC1

Post by MintBerry »

Thanks for posting, they must've changed the threshold without putting it in the patch notes. I can't imagine why they wouldn't have just replied saying that by now though, if true.

Post Reply