We need your help!

Help us document DRM encryption of emergency alerts
Post Reply
nickk
Silicondust
Posts: 21233
Joined: Tue Jan 13, 2004 9:39 am
x 447

Re: We need your help!

Post by nickk »

lenlab wrote: Sun Nov 15, 2026 4:59 am The "ch587000000" in the URL is 587 MHz, which is the center frequency for RF channel 33.

Uhm then this app has a serious issue as my DRM channels are NOT on RF channel 33. They are on RF channel 32 which is 578 frequency! So how is this logic in this app determining where the DRM channels are? Is it correctly finding them?

Maybe that is why Nick is saying there is reception issues for me? Also RF 33 is NOT on my list of channels to receive in my TV FireTV stick app to receive. IT is red X'd out. Ditto on my WIN11 PC. So this makes NO sense!
We are capturing all ATSC 3.0 channels, not just the channels that are using DRM or have been previously identified as using DRM.

kingpin2k
Posts: 1
Joined: Sun Nov 15, 2026 7:21 am

Re: We need your help!

Post by kingpin2k »

1. Would it help if it could use all tuners? (I'd happily let it) If so, can we config the script to go to the max (or number of tuners it can use etc)?

maclark7029
Posts: 3
Joined: Fri Nov 13, 2026 1:38 pm
x 1

Re: We need your help!

Post by maclark7029 »

How do I switch which channel is being monitored? Its currently capturing RF 33 (587 MHz), the Washington DC lighthouse on RF 28 (539 MHz), but its signal is only about 70% strength and 45-65% quality. I receive the Baltimore lighthouse at 100% signal and quality. WMAR 102.1 and WBAL 111.1 there are DRM-encrypted; WBFF 145.1 isn't. WMPT 122.1 and WNUV 154.1 also come in without DRM.

PhilJSmith67
Posts: 12
Joined: Sun Apr 13, 2014 6:13 pm

Re: We need your help!

Post by PhilJSmith67 »

lenlab wrote: Sun Nov 15, 2026 4:59 am The "ch587000000" in the URL is 587 MHz, which is the center frequency for RF channel 33.

Uhm then this app has a serious issue as my DRM channels are NOT on RF channel 33. They are on RF channel 32 which is 578 frequency! So how is this logic in this app determining where the DRM channels are? Is it correctly finding them?

Maybe that is why Nick is saying there is reception issues for me? Also RF 33 is NOT on my list of channels to receive in my TV FireTV stick app to receive. IT is red X'd out. Ditto on my WIN11 PC. So this makes NO sense!
If your ATSC 3.0 signal is on RF 32 then the URL should contain ch581000000 for (center of the channel at 578 - 584 MHz). For my tuner I ran Rescan in the hdhomerun_setup app, not the web interface, and that seemed to affect the frequency EACapture is checking.

Image

nickk
Silicondust
Posts: 21233
Joined: Tue Jan 13, 2004 9:39 am
x 447

Re: We need your help!

Post by nickk »

kingpin2k wrote: Sun Nov 15, 2026 7:24 am 1. Would it help if it could use all tuners? (I'd happily let it) If so, can we config the script to go to the max (or number of tuners it can use etc)?
Running the app on a 2nd PC will work as the HDHomeRun FLEX 4K can receive two ATSC 3.0 channels at once.

If you have two ATSC 3.0 channels there is a 50/50 chance of the server picking the same channel vs picking the other channel.

mike34
Posts: 7
Joined: Thu Apr 02, 2015 8:47 am

Re: We need your help!

Post by mike34 »

I'm in the Chicago area and just got it running on my Synology NAS; thanks for providing the Docker image.

danp
Posts: 20
Joined: Sun Aug 05, 2018 11:56 am
x 2

Re: We need your help!

Post by danp »

Sorry I can't participate in test. I'm receiving a very weak signal (red) on all ATSC 3 signals in my area (23606). Have rescanned, no help. They had been viewable, but at some point they went red. I though they just gave up. Could be receiver though.

Dan

SpiderJerusalem
Posts: 3
Joined: Tue Oct 20, 2020 3:55 pm

Re: We need your help!

Post by SpiderJerusalem »

I'm doing my part!

AI bot just deployed the container on one of my homelabs. Happy to be a part of this and glad the community is here for you!

lenlab
Posts: 108
Joined: Tue Aug 01, 2023 6:00 am
x 7

Re: We need your help!

Post by lenlab »

nickk wrote: Sun Nov 15, 2026 7:20 am
lenlab wrote: Sun Nov 15, 2026 4:59 am The "ch587000000" in the URL is 587 MHz, which is the center frequency for RF channel 33.

Uhm then this app has a serious issue as my DRM channels are NOT on RF channel 33. They are on RF channel 32 which is 578 frequency! So how is this logic in this app determining where the DRM channels are? Is it correctly finding them?

Maybe that is why Nick is saying there is reception issues for me? Also RF 33 is NOT on my list of channels to receive in my TV FireTV stick app to receive. IT is red X'd out. Ditto on my WIN11 PC. So this makes NO sense!
We are capturing all ATSC 3.0 channels, not just the channels that are using DRM or have been previously identified as using DRM.
Yes fine you are picking up all ATSC 3.0 channels but the only channel being reported by your app is one that I am not tunning in. So why? Are you just capturing all ATSC 3.0 channels my antenna is picking up regardless of whether I am actually keeping them in my channel list? I pick up Philly stations poorly since I am in the NYC market. My antenna still shows them in your tuner in red. I have X'd them in the channel scan. So are you picking them up in the app?

lenlab
Posts: 108
Joined: Tue Aug 01, 2023 6:00 am
x 7

Re: We need your help!

Post by lenlab »

PhilJSmith67 wrote: Sun Nov 15, 2026 8:15 am
lenlab wrote: Sun Nov 15, 2026 4:59 am The "ch587000000" in the URL is 587 MHz, which is the center frequency for RF channel 33.

Uhm then this app has a serious issue as my DRM channels are NOT on RF channel 33. They are on RF channel 32 which is 578 frequency! So how is this logic in this app determining where the DRM channels are? Is it correctly finding them?

Maybe that is why Nick is saying there is reception issues for me? Also RF 33 is NOT on my list of channels to receive in my TV FireTV stick app to receive. IT is red X'd out. Ditto on my WIN11 PC. So this makes NO sense!
If your ATSC 3.0 signal is on RF 32 then the URL should contain ch581000000 for (center of the channel at 578 - 584 MHz). For my tuner I ran Rescan in the hdhomerun_setup app, not the web interface, and that seemed to affect the frequency EACapture is checking.

Image
I have done a number of rescans and it did not change anything.

dseto@live.com
Posts: 2
Joined: Wed Nov 11, 2026 3:21 pm

Re: We need your help!

Post by dseto@live.com »

Seem to keep getting the 503 error, not sure how to correct. have already did a rescan, reboot, and all main signals are 99-100% of strength.

Code: Select all

Loaded configuration
Found: HDHomeRun CONNECT 4K 10808E3D
Chosen: 10808E3D
Check-in succeeded.
    Clock delta: -1.4 sec
Next capture to run at 11/15/2026 12:16:44 PM
Capturing http://192.168.50.82:5004/auto/ch497000000p0p1?format=dbg&duration=15 to b2ad2f4597bb4e13836bdf899b0cd7f7.tmp
Capture failed: http://192.168.50.82:5004/auto/ch497000000p0p1?format=dbg&duration=15 (server returned 503 Service Unavailable). Partial data (if any) left at: C:\Users\dseto\AppData\Local\EACapture\Captures\b2ad2f4597bb4e13836bdf899b0cd7f7.tmp
Next capture to run at 11/15/2026 6:30:28 PM

nickk
Silicondust
Posts: 21233
Joined: Tue Jan 13, 2004 9:39 am
x 447

Re: We need your help!

Post by nickk »

We need captures from all channels, but if are multiple ATSC 3.0 channels in your area and you really really really want to have it capture a different channel, you can have it repeat the random selection by 1) stopping the app, 2) deleting checkin_state.json in C:\Users\[username]\AppData\Local\EACapture\ 3) launching the app again.

lenlab
Posts: 108
Joined: Tue Aug 01, 2023 6:00 am
x 7

Re: We need your help!

Post by lenlab »

Am I getting captures from all channels? I only see one. 587 which is not even an ATSC 3.0 channel in my list of channels I want in my scans.

Loaded configuration
Found: HDHomeRun FLEX 4K 10ABA79B
Chosen: 10ABA79B
Check-in succeeded.
Clock delta: -0.6 sec
Next capture to run at 11/14/2026 3:39:08 PM
Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to 5e418183229f4faab44c07f18d26af3c.tmp
Upload to run at 11/14/2026 3:39:42 PM
Uploading 5e418183229f4faab44c07f18d26af3c.tmp
Next capture to run at 11/14/2026 9:23:31 PM
Found: HDHomeRun FLEX 4K 10ABA79B
Chosen: 10ABA79B
Check-in succeeded.
Clock delta: -0.6 sec
Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to cebd33742ee844ac9d8c47d79fea8379.tmp
Upload to run at 11/14/2026 9:24:17 PM
Uploading cebd33742ee844ac9d8c47d79fea8379.tmp
Next capture to run at 11/15/2026 3:08:06 AM
Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to 1ed82ccba2094314b617056cb4157101.tmp
Upload to run at 11/15/2026 3:08:59 AM
Uploading 1ed82ccba2094314b617056cb4157101.tmp
Next capture to run at 11/15/2026 8:53:07 AM
Found: HDHomeRun FLEX 4K 10ABA79B
Chosen: 10ABA79B
Check-in succeeded.
Clock delta: -0.6 sec
Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to 7ee93841b11742268417d8ce7451f174.tmp
Capture failed: http://192.168.50.228:5004/auto/ch58700 ... uration=15 (server returned 503 Service Unavailable). Partial data (if any) left at: C:\Users\lenla\AppData\Local\EACapture\Captures\7ee93841b11742268417d8ce7451f174.tmp
Next capture to run at 11/15/2026 3:16:27 PM
Found: HDHomeRun FLEX 4K 10ABA79B
Chosen: 10ABA79B
Check-in succeeded.
Clock delta: -0.6 sec

nickk
Silicondust
Posts: 21233
Joined: Tue Jan 13, 2004 9:39 am
x 447

Re: We need your help!

Post by nickk »

lenlab wrote: Sun Nov 15, 2026 10:43 am Am I getting captures from all channels? I only see one.
The server assigns one channel to capture to keep things simple. The approach relies on there being multiple people in areas with multiple channels.

lenlab
Posts: 108
Joined: Tue Aug 01, 2023 6:00 am
x 7

Re: We need your help!

Post by lenlab »

Okay well in my case it is assigning a very wrong channel if it is ch587! I doubt you will get anything useful from ch587 since it is from Philly and poor reception as opposed to my NYC broadcasters!

Post Reply