We need your help!

Help us document DRM encryption of emergency alerts
Post Reply
maclark7029
Posts: 3
Joined: Fri Nov 13, 2026 1:38 pm
x 1

Re: We need your help!

Post by maclark7029 »

Running the Linux version (eacapture.php 1.0.0.0) on Ubuntu with an HDHomeRun CONNECT 4K, firmware 20261107, since Nov 12. No problems so far: check-ins every 8 hours, a capture about every 6 hours, each one uploaded within a minute or two.

Code: Select all

  2026-11-14 12:57:34  Found: HDHomeRun CONNECT 4K 108135A6
  2026-11-14 12:57:34  Chosen: 108135A6
  2026-11-14 12:57:35  Check-in succeeded.
  2026-11-14 12:57:35      Clock delta: -0.3 sec
  2026-11-14 15:27:56  Capturing http://<tuner>:5004/auto/ch587000000p0p1?format=dbg&duration=15 to
  3afae609d2c0d89769d3c1facd88ed64.tmp
  2026-11-14 15:28:11  Upload to run at 2026-11-14 15:28:19
  2026-11-14 15:29:02  Uploading 3afae609d2c0d89769d3c1facd88ed64.tmp
  2026-11-14 15:29:44  Next capture to run at 2026-11-14 21:41:29
  
All my captures so far have been RF 33 (587 MHz), the Washington DC lighthouse:
  • 104.1 WRC (NBC) - DRM
  • 105.1 WTTG (FOX) - DRM
  • 107.1 WJLA (ABC) - no DRM
  • 109.1 WUSA (CBS) - DRM
  • 132.1 WHUT (PBS) - no DRM
Signal on RF 33 is fair, about 70% strength and 45-65% quality.

I also get the Baltimore lighthouse on RF 28 (539 MHz) at 100% signal and quality. WMAR 102.1 and WBAL 111.1 there are DRM-encrypted; WBFF 145.1 isn't. WMPT 122.1 and WNUV 154.1 also come in without DRM. So far the server has only scheduled DC (RF 33) captures for me, but I'm happy to capture RF 28 too if that's useful.

For the Linux folks asking: it just needs php-cli and php-curl. I run it in a tmux session and it's been fine.
Last edited by maclark7029 on Sat Nov 14, 2026 12:43 pm, edited 2 times in total.

zekyl314
Posts: 3
Joined: Sat Nov 14, 2026 11:48 am

Re: We need your help!

Post by zekyl314 »

Is there a way to force a check? I had an issue with a 503, and did a channel rescan, and I don't want to wait 8 hours to see if it worked.
-Mike

chrisblackstone
Posts: 1
Joined: Sat Nov 14, 2026 12:19 pm

Re: We need your help!

Post by chrisblackstone »

Using the Mac App v2, I'm getting errors

14:20:57 Using the built-in PHP.
14:20:57 First launch
14:20:58 Found: HDHomeRun FLEX 4K 10A4EE1C
14:20:58 Chosen: 10A4EE1C
14:20:58 ERROR: No ATSC 3.0 channels detected
14:20:58 ERROR: Please run a new channel scan in the HDHomeRun app: Settings menu, Channels
14:20:58 Check-in failed: HDHomeRun 10A4EE1C failed 2 check(s) - see the errors above.
14:20:58 Will retry in 60 seconds.

IU've done a rescan in the iOS App and in the Web Admin for my HD Home Run

nickk
Silicondust
Posts: 21233
Joined: Tue Jan 13, 2004 9:39 am
x 447

Re: We need your help!

Post by nickk »

zekyl314 wrote: Sat Nov 14, 2026 12:18 pm Is there a way to force a check? I had an issue with a 503, and did a channel rescan, and I don't want to wait 8 hours to see if it worked.
-Mike
Easiest is to stop the app and launch it again.

nickk
Silicondust
Posts: 21233
Joined: Tue Jan 13, 2004 9:39 am
x 447

Re: We need your help!

Post by nickk »

chrisblackstone wrote: Sat Nov 14, 2026 12:22 pm Using the Mac App v2, I'm getting errors

14:20:57 Using the built-in PHP.
14:20:57 First launch
14:20:58 Found: HDHomeRun FLEX 4K 10A4EE1C
14:20:58 Chosen: 10A4EE1C
14:20:58 ERROR: No ATSC 3.0 channels detected
14:20:58 ERROR: Please run a new channel scan in the HDHomeRun app: Settings menu, Channels
14:20:58 Check-in failed: HDHomeRun 10A4EE1C failed 2 check(s) - see the errors above.
14:20:58 Will retry in 60 seconds.

IU've done a rescan in the iOS App and in the Web Admin for my HD Home Run
Checking, did the channel scan show any ATSC 3.0 channels (channels numbered 100+)

shpitz461
Posts: 2
Joined: Thu Nov 12, 2026 7:34 am

Re: We need your help!

Post by shpitz461 »

Great, now I'm running the docker container instead of directly on my HTPC.
Log looks clean.

lenlab
Posts: 108
Joined: Tue Aug 01, 2023 6:00 am
x 7

Re: We need your help!

Post by lenlab »

Does this app tell us which channels it is checking? I can't tell from the info it displays what exactly it is checking if anything? I can't tell if it is doing anything meaningful for the test.

I have a number of ATSC DRM channels in the NYC market.

Loaded configuration
Found: HDHomeRun FLEX 4K 10ABA79B
Chosen: 10ABA79B
Check-in succeeded.
Clock delta: -0.6 sec
Next capture to run at 11/14/2026 3:39:08 PM
Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to 5e418183229f4faab44c07f18d26af3c.tmp
Upload to run at 11/14/2026 3:39:42 PM
Uploading 5e418183229f4faab44c07f18d26af3c.tmp
Next capture to run at 11/14/2026 9:23:31 PM

zekyl314
Posts: 3
Joined: Sat Nov 14, 2026 11:48 am

Re: We need your help!

Post by zekyl314 »

nickk wrote: Sat Nov 14, 2026 12:36 pm
zekyl314 wrote: Sat Nov 14, 2026 12:18 pm Is there a way to force a check? I had an issue with a 503, and did a channel rescan, and I don't want to wait 8 hours to see if it worked.
-Mike
Easiest is to stop the app and launch it again.
I've done that a few times, and it just states it will run in X, which is a while away. I'm running the Linux php version. It's okay, time has passed and now it has successfully uploaded after I did the rescan.

I do wish there was logging on what it did afterwards. But I realize this is mainly for the EAS testing.

Nice work all!

-Mike

zekyl314
Posts: 3
Joined: Sat Nov 14, 2026 11:48 am

Re: We need your help!

Post by zekyl314 »

lenlab wrote: Sat Nov 14, 2026 2:16 pm Does this app tell us which channels it is checking? I can't tell from the info it displays what exactly it is checking if anything? I can't tell if it is doing anything meaningful for the test.

I have a number of ATSC DRM channels in the NYC market.

Loaded configuration
Found: HDHomeRun FLEX 4K 10ABA79B
Chosen: 10ABA79B
Check-in succeeded.
Clock delta: -0.6 sec
Next capture to run at 11/14/2026 3:39:08 PM
Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to 5e418183229f4faab44c07f18d26af3c.tmp
Upload to run at 11/14/2026 3:39:42 PM
Uploading 5e418183229f4faab44c07f18d26af3c.tmp
Next capture to run at 11/14/2026 9:23:31 PM
I found if you look at the logs on the HD Homerun GUI it is easier to figure out.
In your example it is channel 587, which is atsc3:587MHz if I compare it to my logging.
-Mike

java007md
Posts: 2
Joined: Fri Mar 08, 2013 9:32 pm

Re: We need your help!

Post by java007md »

Avi wrote: Thu Nov 12, 2026 9:46 pm
bh56 wrote: Wed Nov 11, 2026 3:14 pm Nick,
I would like to help out. I have a HDHomeRun FLEX 4K (HDFX-4K) in my AZ home. But I'm currently in MN. I have both of my homes connected with a VPN, so I can access remotely my Flex 4k. But when I run the EACapture application, it must not be able to see it. It's on a different subnet, but accessible. Is there a way to configure EACapture the IP address that it should look for my HDHomeRun device. Doesn't look like from the UI, I can set this.

If you can instruct me, I would like to help out as some Channels in the Phoenix area are using DRM so, they don't work.

Thanks,
Brian
I also have my tuner on another subnet, so I modified the script to accept a command line flag --tuner-ip to specify the tuner's IP directly.
https://privatebin.cc/?0dd55dbd72b44bcb ... fxBAbvf8tP
Thank you! Compared your code to the original - looks clean and running fine after the firmware update and updated channel scan.

PhilJSmith67
Posts: 12
Joined: Sun Apr 13, 2014 6:13 pm

Re: We need your help!

Post by PhilJSmith67 »

lenlab wrote: Sat Nov 14, 2026 2:16 pm Does this app tell us which channels it is checking? I can't tell from the info it displays what exactly it is checking if anything? I can't tell if it is doing anything meaningful for the test.

(...)

Capturing http://192.168.50.228:5004/auto/ch58700 ... uration=15 to 5e418183229f4faab44c07f18d26af3c.tmp

(...)
The "ch587000000" in the URL is 587 MHz, which is the center frequency for RF channel 33.

TurboDan
Posts: 1
Joined: Wed Jul 28, 2021 1:33 pm

Re: We need your help!

Post by TurboDan »

Downloaded and running!

Williams
Posts: 33
Joined: Mon Oct 12, 2020 8:33 pm
x 1

Re: We need your help!

Post by Williams »

I am getting the same server returned 503 Service Unavailable error on my captures. The device is a 4k CONNECT that I ordered during the kickstarter promotion. I restarted it and waiting for my next capture results.

UPDATE: Completing a channel scan then reinstalling the application fixed the issue and captures are now being uploaded.

Cook1217
Posts: 15
Joined: Sat Dec 16, 2023 2:27 am

Re: We need your help!

Post by Cook1217 »

Installed it in UNRAID (docker). As long as it says "next capture to run at..." in the logs, it's good, right?

Detroit area. 2 ATSC 3.0's are viewable.

lenlab
Posts: 108
Joined: Tue Aug 01, 2023 6:00 am
x 7

Re: We need your help!

Post by lenlab »

The "ch587000000" in the URL is 587 MHz, which is the center frequency for RF channel 33.

Uhm then this app has a serious issue as my DRM channels are NOT on RF channel 33. They are on RF channel 32 which is 578 frequency! So how is this logic in this app determining where the DRM channels are? Is it correctly finding them?

Maybe that is why Nick is saying there is reception issues for me? Also RF 33 is NOT on my list of channels to receive in my TV FireTV stick app to receive. IT is red X'd out. Ditto on my WIN11 PC. So this makes NO sense!

Post Reply