We need your help!

[nickk]

We need your help!

Instructions:
viewtopic.php?t=80827

[bh56]

Nick,
I would like to help out. I have a HDHomeRun FLEX 4K (HDFX-4K) in my AZ home. But I'm currently in MN. I have both of my homes connected with a VPN, so I can access remotely my Flex 4k. But when I run the EACapture application, it must not be able to see it. It's on a different subnet, but accessible. Is there a way to configure EACapture the IP address that it should look for my HDHomeRun device. Doesn't look like from the UI, I can set this.

If you can instruct me, I would like to help out as some Channels in the Phoenix area are using DRM so, they don't work.

Thanks,
Brian

[Fin74501]

I would love if you would make a docker version of this because my Windows computer doesn't run 24/7 but my unraid server does.

[dseto@live.com]

I am in Jacksonville FL, I can help. we will have our antenna setup this weekend as we just moved, but shouldn't been an issue to help out on my end. just let me know anything specific other then what is noted in the sticky post.

[Lost Dog]

I'd be happy to do there is there was a linux option! I only have linux on my systems.

I would set it up on my sever and let it go...

[Dracolis]

Set up and running. Hope it helps!

Code: Select all

First launch
Found: HDHomeRun FLEX 4K 10AA529B
Chosen: 10AA529B
Check-in succeeded.
    Clock delta: -1.3 sec
Next capture to run at 11/11/2026 5:48:07 PM

[squarecmb]

I keep getting this:

Code: Select all

First launch
Found: HDHomeRun FLEX 4K 10AAB784
Chosen: 10AAB784
ERROR: Please run a new channel scan in the HDHomeRun app: Settings menu, Channels
Check-in failed: HDHomeRun 10AAB784 failed 1 check(s) - see the errors above.
Will retry in 10 minutes.

[PhilJSmith67]

Running.

Code: Select all

First launch
Found: HDHomeRun FLEX 4K DEV 10A4D51A
Chosen: 10A4D51A
Check-in succeeded.
    Clock delta: -0.3 sec
Next capture to run at 2026-11-11 22:28:59

The two ATSC 3.0 stations I get are...
RF 6 - WRME-LD Chicago - weak signal / intermittent reception
RF 12 - WBBM-NG Chicago - good signal / consistent reception

[EK701]

I'd be happy to do there is there was a linux option! I only have linux on my systems.

I would set it up on my sever and let it go...

Same here!

[KeithAbbott]

Does the EACapture app verify that the tuner is not in use before capturing the data?

[CharleyK]

I have two HDHomeRun Tuners -

Loaded configuration
Found: HDHomeRun CONNECT QUATRO 107340A2
Found: HDHomeRun CONNECT 4K 10815F21
Chosen: 10815F21
Check-in succeeded.
Clock delta: -0.7 sec
Message from server: ERROR: No ATSC 3.0 channels

But I see many channels in the tuner -


Imgur - http://imgur.com/a/u31hkke

[noseph@gmail.com]

I am also getting

First launch
Found: HDHomeRun FLEX 4K 10AAB784
Chosen: 10AAB784
ERROR: Please run a new channel scan in the HDHomeRun app: Settings menu, Channels
Check-in failed: HDHomeRun 10AAB784 failed 1 check(s) - see the errors above.
Will retry in 10 minutes.

I have the channel scan several tiimes and noticed the the ATSC 3.0 channels are not being reported any more. There use to be 4 or 5 of them. I am in the Charlotte, NC area.

[vmsman]

For the same reason I don't support DRM encryption, I don't run Windows. I will support your test in Linux. Privacy first. The right to the public airwaves without encryption.

[magoojr79]

Same, I have two of the original Connect 4k (not flex) and one Flex Duo. I've upgraded the firmware on all three, ran the channel scans via the web interface, the HDHR Config GUI app, and in the HDHR player app. I keep getting this error on whichever Connect 4k is found first.

I keep getting this:

Code: Select all

First launch
Found: HDHomeRun FLEX 4K 10AAB784
Chosen: 10AAB784
ERROR: Please run a new channel scan in the HDHomeRun app: Settings menu, Channels
Check-in failed: HDHomeRun 10AAB784 failed 1 check(s) - see the errors above.
Will retry in 10 minutes.

[nickk]

I keep getting this:

Code: Select all

First launch
Found: HDHomeRun FLEX 4K 10AAB784
Chosen: 10AAB784
ERROR: Please run a new channel scan in the HDHomeRun app: Settings menu, Channels
Check-in failed: HDHomeRun 10AAB784 failed 1 check(s) - see the errors above.
Will retry in 10 minutes.

Easily fixed - please run the normal HDHomeRun app (can be on any device on your home network) and go into Settings (gear icon top right), Channels, and click the scan button to kick off a channel scan.