By the way it is on 12.5 in phoenix but guide (still?) shows Get


https://www.watchtwist.com/

looks to be carried by 70 stations now and was announce back in February

The main things to check are listed at https://info.hdhomerun.com/info/drm The log actually only showed good information as far as the prime is concerned as it reported subscribed and didn't revert to not-subscribed. The other thing to check on the prime is that it actually picked up that the channe...

I believe that is one of the markets that has channels outside the range of the scan as I had read that the 4K was only going to 36 now for scan as "all" channels should be 36 or under now as phones can use down to that now. When I looked a few weeks ago I couldn't see that post but it was mentioned...

Most would see the 4k detect more channels than the extend. Make sure your signal isn't too hot and you have an lte filter. You may also wish to swap the cables and see if it follows cable.

You also didn't mention your market to determine which frequencies you need.

It will do that if it notices a change of devices compared to what is registered to your account... the expected action is "continue" which updates your account to what was found then. However if it changes again the next time you start it will show that page again. Frequently I move devices around ...

Long time Phoenix HDHR user but just got the ATSC 3.0 capable one today. I am seeing the RF27 channels but not the RF35. Is it just me? I live just a few miles from the South Mountain towers, easily line of sight. Thanks! Didn't notice any problems the day you mentioned such even up until yesterday...

Your first part isn't really about rule improvements but is its own topic... personally would hate this as I have never had such work correctly for me as it always ends up deleting something it shouldn't. I do believe there should be 2-4 fields added in the saved rule to help with such mainly so the...

I do suggest going to thegreenbutton.tv as they are generally the more WMC focused forum. Really the only thing I can suggest on a rebuild is to run the DCA (may need to run mcupdate but MS may have shut that down), and make sure to update playready before setting up tuners. You may also need to reb...

Right now I am not seeing hide or unhide in the UI... but If you really wish to unhide it you can do so from a browser: get the DeviceAuth from the discover.json of the tuner (<ip-of-tuner>/discover.json) do a search for .hidden http://api.hdhomerun.com/api/search?DeviceAuth=some_long_string&Search=...

Typically each generation gets better at such and for me the "4K" has been the best in getting many channels but that doesn't apply to everyone. In your use case I wouldn't even be surprised if an even older model than that 3rd gen works a bit better... the way I like to describe it is the the newer...

I suggest asking/looking in thegreenbutton.tv for some tips. But for your use case TunerSalad woudn't even be necessary as it is 4 of each type and so you can have 4 OTA and 4 CableCard tuners without needing TunerSalad. I do have one unit that long ago when I moved and changed networks (thus subnet...

Nothing really for SD to fix as they are 100% dependent on the channel scan. Yes it would be great if SD had a way to make manual changes (long ago I even suggested compiling an official list of channel names so names can easily be matched to guide). A prime with cablecard would fix such as the card...

"All" only means "one" (of any given episode). However you can force it to a specific channel. It has been awhile since I checked but it used to be the engine would only record one of the same episode when starting at the same time even when recording oneoffs which would usually force another copy o...

Yes they is referring to your provider. When they send hits it can be "hours" before all of them clear (typically a hit gets sent 4 times often with a 5-30 minute window between them so it can be important to wait them out before moving on to the next step otherwise it may change things) and one of ...

First are those channels detected by the scan and properly labeled as being drm protected. If that is the case, your issue is with the client or network. If they aren't detected, typically that is a result of the Pairing process that a hit was on the line that reset the data id so they must enter th...