Currently, the official HDHomeRun Android app relies exclusively on local Layer 2 UDP broadcast discovery (255.255.255.255:65001) to locate tuners. When connecting remotely over a Layer 3 VPN tunnel (such as WireGuard) or across routed VLANs/subnets, Layer 2 broadcast packets do not traverse the tunnel—and Android's non-root VpnService API prevents third-party helper apps from relaying local broadcast packets across a tun interface.
Even when full unicast IP connectivity to the tuner (http://192.168.1.39, TCP 80, TCP/UDP 65001, and TCP/UDP 5002/5004) is open and verified in a mobile browser from the Wireguard client at 192.168.4.15, the official Android app cannot connect because there is no way to specify a tuner's IP address manually.
Proposal
Add an optional "Manual Tuner IP" (or "Add Tuner by IP") field inside the HDHomeRun Android app settings:
- Allow users to enter one or more static IP addresses or hostnames (e.g., 192.168.1.39).
- Query http://<tuner-ip>/discover.json (or send a direct unicast discovery packet to UDP port 65001) as an addition or fallback when local UDP broadcast discovery finds no tuners.
Why This Helps
The HDHomeRun hardware firmware already supports unicast HTTP discovery via discover.json (which third-party clients like VLC, Jellyfin, Plex, and Channels DVR already use to connect across VPNs and VLANs). Adding a simple IP input field in the Android app requires no hardware firmware changes and unlocks native app support for WireGuard VPN users and segmented home networks.
Thanks!