ATSC 3.0 channels not scanning - Justin.U

ATSC 3.0 Nextgen TV Forum
Post Reply
Justin.U
Posts: 128
Joined: Thu Oct 03, 2024 1:27 pm
Contact:

ATSC 3.0 channels not scanning - Justin.U

Post by Justin.U »

Ever since I did the firmware update I'm unable to scan in the next gen ATSC 3.0 channels when is that going to be fixed and why did they disappear after the firmware update is there a reason for this issue. When do we expect an update on a fix so we can get those channels back.

jasonl
Silicondust
Posts: 17994
Joined: Sun Oct 28, 2007 9:23 pm
x 125

Re: ATSC 3.0 channels not scanning - Justin.U

Post by jasonl »

We would like to get some diagnostic data to see what is happening:
  1. In a web browser go to http://hdhomerun.local
    NOTE: That address will go do the first HDHomeRun device found on your network. If you have more than one HDHomeRun device, use the "device ID" printed on the bottom of the unit instead of "hdhomerun" in the address. For example, if your device ID was 104FFFFF then you would go to http://104fffff.local
  2. Click "System Menu"
  3. Check the "Send diagnostic information" box (if this box is already checked, please un-check then re-check it)
  4. Go back one page
  5. Click "Channel Lineup"
  6. Click on "Detect Channels"
Reply back and provide us the device ID of your HDHomeRun and we will check the logs. You can find the device ID on a label on the bottom of the HDHomeRun itself.

Justin.U
Posts: 128
Joined: Thu Oct 03, 2024 1:27 pm
Contact:

Re: ATSC 3.0 channels not scanning - Justin.U

Post by Justin.U »

jasonl wrote: Thu Nov 19, 2026 6:38 pm We would like to get some diagnostic data to see what is happening:
  1. In a web browser go to http://hdhomerun.local
    NOTE: That address will go do the first HDHomeRun device found on your network. If you have more than one HDHomeRun device, use the "device ID" printed on the bottom of the unit instead of "hdhomerun" in the address. For example, if your device ID was 104FFFFF then you would go to http://104fffff.local
  2. Click "System Menu"
  3. Check the "Send diagnostic information" box (if this box is already checked, please un-check then re-check it)
  4. Go back one page
  5. Click "Channel Lineup"
  6. Click on "Detect Channels"
Reply back and provide us the device ID of your HDHomeRun and we will check the logs. You can find the device ID on a label on the bottom of the HDHomeRun itself.

http://10A49453.local

http://10A515F8.local

Post Reply