Chicago: scanned channels went from 100+ to 21

[rkulagow]

Hardware Model HDFX-2US
Firmware Version 20260326
Device ID 10954807

A few weeks ago, list of channels that I can watch went from 100 to 21, and it's a weird mix.

For example, I scanned WBBM-DT3 on 2.3, but not WBBM-DT or DT2

Nothing on the hardware side has changed; it's an antenna in the attic, so not really subject to weather. The HDHR is directly connected to the antenna using a 6 foot cable; ethernet is used to make the signal available inside the house, so it's not a long run of RG-6 coax.

I've enabled debugging / extended logging. Is there anything showing what happened?

Bob

[jasonl]

Please open a support ticket.
https://www.silicondust.com/contact-support.html

[howardc1243]

Hardware Model HDFX-2US
Firmware Version 20260326
Device ID 10954807

A few weeks ago, list of channels that I can watch went from 100 to 21, and it's a weird mix.

For example, I scanned WBBM-DT3 on 2.3, but not WBBM-DT or DT2

Nothing on the hardware side has changed; it's an antenna in the attic, so not really subject to weather. The HDHR is directly connected to the antenna using a 6 foot cable; ethernet is used to make the signal available inside the house, so it's not a long run of RG-6 coax.

I've enabled debugging / extended logging. Is there anything showing what happened?

Bob

you might want to consider doing a consistent channel scan from time to time to see if the channels you're familiar
with return.