Flex Duo Not Using Second Tuner

[Dusty@]

I have various 3 Roku TVs and 2 set top boxes. All are having essentially the same issue. If I have a live channel on in one room and try to turn on the same channel, the load bar goes about halfway and stops. Once I received the all tuners in use message. I checked, it showed only one tuner in use (#0). I opened the Channels app on tablet and I was able to tune the same channel but I forgot to check if the second tuner (#1) was in use then. I tuned to another channel and checked, both tuners were in use then so I don't thin it is a tuner problem.

I've unplugged the hard drive, made sure the software was up to date and rebooted numerous times. No luck. In fact for awhile last night I could not even get different live channels on two devices.

I have filed a ticket, no real response yet.

This only became an issue after the update that included the new splash screen, the system worked flawlessly prior to that.

I'm hoping someone is having or had the same issue and found a resolution or at least tell me how to rollback the software.

[Dusty@]

Please disregard, as of lunch today, the system was working fine.