Encryption

ATSC 3.0 Forum
Post Reply
Cabal
Posts: 201
Joined: Mon Jun 09, 2014 1:53 pm
x 40

Re: Encryption

Post by Cabal »

DigitaLSD wrote: Sat Sep 07, 2024 1:08 am 2) Within the first page or two, or perhaps the last one (that's all I read because 32 pages of forum posts are too many), it was mentioned that if the channel doesn't tune, it will drop back to the ATSC 1.0 feed, but in my case, this is not happening.
That is for scheduled DVR recordings, not manual tuning. For manual tuning, it shows you the status of what you clicked on.

For DRM channels, you may wish to remove it from your listing for now (red X in the channel editor).

jboffer
Posts: 1
Joined: Sat Sep 07, 2024 7:58 am

Re: Encryption

Post by jboffer »

Saw some discussion on the "Channels" app with AppleTV and wanted clarification.

If I have a HDHR 4k Flex --> router --> AppleTV --> Channels App, can I watch the DMR 3.0 channels live?

Or was this being discussed only as a preferable 1.0 setup...

Freekick123
Posts: 32
Joined: Sun Nov 29, 2020 7:23 am
x 9

Re: Encryption

Post by Freekick123 »

jboffer wrote: Sat Sep 07, 2024 8:03 am Saw some discussion on the "Channels" app with AppleTV and wanted clarification.

If I have a HDHR 4k Flex --> router --> AppleTV --> Channels App, can I watch the DMR 3.0 channels live?

Or was this being discussed only as a preferable 1.0 setup...
There are NO apps that will decrypt DRM ATSC 3.0 channels. DRM only works for ATSC 3.0 with a direct connection via HDMI.

HoTst2
Posts: 50
Joined: Sat May 13, 2023 3:57 pm
x 14

Re: Encryption

Post by HoTst2 »

Freekick123 wrote: Sat Sep 07, 2024 8:06 am
jboffer wrote: Sat Sep 07, 2024 8:03 am Saw some discussion on the "Channels" app with AppleTV and wanted clarification.

If I have a HDHR 4k Flex --> router --> AppleTV --> Channels App, can I watch the DMR 3.0 channels live?

Or was this being discussed only as a preferable 1.0 setup...
There are NO apps that will decrypt DRM ATSC 3.0 channels. DRM only works for ATSC 3.0 with a direct connection via HDMI.
Or to be more specific...

Currently DRM encrypted ATSC 3.0 channels may only be received by TV sets with 3.0 capable off-air tuners. Or through a few 3.0 Nexgen certified STB devices on the market that connect by HDMI cable to a TV set.

hancox
Posts: 56
Joined: Sun Aug 20, 2017 5:53 am
x 8

Re: Encryption

Post by hancox »

NedS wrote: Fri Aug 23, 2024 7:02 pm A3SA had only provided a path forward for Android platforms at the moment. I have been given the impression that a non-technical issue/disagreement is currently blocking progress on that. Nick is still working on a public shame letter addressed to the A3SA and other relevant authorities.

We remain hopeful that the A3SA might yet come to their senses.
So, it's almost been a month since this nugget. Not that a "strongly worded letter" is usually a good sign, but anything happening here?

I'm losing hope and increasingly thinking I'm just saving space for V2 of the 6 tuner cablecard debacle.

joblo
Posts: 84
Joined: Fri Mar 05, 2021 2:45 am
x 3

Re: Encryption

Post by joblo »

hancox wrote: Thu Sep 19, 2024 3:18 am Not that a "strongly worded letter" is usually a good sign
I agree.

NatHillIV
Posts: 83
Joined: Mon Feb 20, 2017 5:43 am
x 4

Re: Encryption

Post by NatHillIV »

Does this mean anything at all in regards to SiliconDust/DRM?

https://www.tvtechnology.com/news/media ... w-new-york

One blurb in the article mentioned this, and I'm not sure what it means (if anything) for folks like me who really wish my Silicon Dust 4K tuners could handle DRM.

"For off-air applications, it is possible to use inexpensive integrated receiver/decoders (IRDs) that do not offer decryption but are equipped with encrypted IP stream outputs via DASH/ROUTE or the recently approved ALP A/330 Link-Layer Protocol, it said.
The capability enables ATSC 3.0 compliance for IRDs used for streaming platforms, such as HDHomeRun, with LogServer managing the DRM aspects for all channel sources, it said."

NedS
Silicondust
Posts: 3271
Joined: Mon Dec 10, 2018 12:38 pm
x 100

Re: Encryption

Post by NedS »

Mediaproxy appears to have certs for monitoring, diagnostics, etc, for station engineers and such. It's not something that home users/customers can use.

NatHillIV
Posts: 83
Joined: Mon Feb 20, 2017 5:43 am
x 4

Re: Encryption

Post by NatHillIV »

NedS wrote: Thu Oct 03, 2024 7:42 am Mediaproxy appears to have certs for monitoring, diagnostics, etc, for station engineers and such. It's not something that home users/customers can use.
Thanks for the answer.
That echoes what I heard on the AVS forum. Hopefully you guys can figure out a way to break DRM on an affordable add-on device for each TV. I would go for that.

howardc1243
Posts: 187
Joined: Fri Apr 08, 2022 4:50 am
Device ID: scribe 4k 15402ABF
x 13

Re: Encryption

Post by howardc1243 »

NatHillIV wrote: Thu Oct 03, 2024 4:28 pm
NedS wrote: Thu Oct 03, 2024 7:42 am Mediaproxy appears to have certs for monitoring, diagnostics, etc, for station engineers and such. It's not something that home users/customers can use.
Thanks for the answer.
That echoes what I heard on the AVS forum. Hopefully you guys can figure out a way to break DRM on an affordable add-on device for each TV. I would go for that.
a3sa would have a skunk if nickk or neds pulled that kind of a shortcut however payback is a ...

Post Reply