Why does HDHR5-2US have port 554 open?

Want to write your own code to work with a HDHomeRun or work with the HDHomeRun DVR? We are happy to help with concepts, APIs, best practices.
Post Reply
Posts: 2
Joined: Sun Mar 09, 2014 12:43 pm

Why does HDHR5-2US have port 554 open?

Post by ronzie9 »

I was scanning my LAN with nmap and discovered that my HDHR5-2US has port 554 open. This is usually used for the rtsp protocol. Why is it open?

I apologize if this is not the correct forum to post this question.

Posts: 555
Joined: Wed Sep 17, 2014 12:09 pm
Device ID: 1080DB11,1040501B
Location: Tobyhanna, PA
x 15

Re: Why does HDHR5-2US have port 554 open?

Post by kyl416 »

Using curl to access port 554 on my HDHomeRun does return a RTSP server response:

Code: Select all

< RTSP/1.0 200 OK
< SERVER: HDHomeRun/1.0
< CSeq: 1
I haven't figured out the correct URL format, but I was able get ffmpeg/ffplay to retrieve a SDP response by using rtsp://IPAddress/tuner<n>/whatever

Some of the firmware updates from 2013 and 2014 also mention rtsp

Posts: 16861
Joined: Sun Oct 28, 2007 9:23 pm
x 33

Re: Why does HDHR5-2US have port 554 open?

Post by jasonl »

WMC uses RTSP for streaming from CableCARD devices. Most of the firmware is common across all modern devices, so it's probably just there. AFAIK there's no way to actually tune channels using it, as WMC uses the DRI CAS:SetChannel interface to do that and just uses RTSP for the network part of things.

Post Reply