ATSC 3.0 Miami, FL

[toei]

Hey jedex I have the same problem as you. I'm in Broward and with beta firmware I'm able to tune 106 but if I change the channel and go back it won't tune. Probably works 1 out of 5 tries. I have good signal so I don't think that's the problem.

im in broward too. you guys need check and read this thread imo , its because signal get encrypted. its get encrypted then not encrypted thats the problem you can see that with hdhomerun utility

[rcevans]

The problem has to be tuner related. One minute I connect to 106 and the signal is solid and flawless. No dropouts no pixels. I can keep it on for 10-15-20 minutes and it works fine. I then switch the channel and come right back to 106 and it does not connect. Same test with same results with 104 123 and 151. Sometimes none tune in. When you finally get one to tune in same as above. And 102 never works.

I'm thinking there may be a premature "no video" trigger, I've found if I leave and return to the channel a couple of times, I can get the signal.

[joblo]

102.1 is an OTT channel (delivered via internet) which is not currently supported.

Nor should it be a priority to EVER support this, IMO.

I didn't spend money on the HDHR-4K kickstarter so SD could build a streaming box. If WPBT wants to stream its content, there are cheaper and more straightforward ways to do that completely aside from ATSC 3.0.

I commented further on WPBT's "Fraudcasting 3.0" in the AVS Forum ATSC 3.0 thread here.

[pereira1976]

I am so dissapointed I bought this device only for the ATSC 3.0 channels but unable to see any in Miami. It says “ no video” Only gets all 1.0. Channels that I had no problem getting with no special device. I sent several e-Mai’s to Silicon Dust and no help. I am planning to return the device. What for. ???

[nickk]

I am so dissapointed I bought this device only for the ATSC 3.0 channels but unable to see any in Miami. It says “ no video” Only gets all 1.0. Channels that I had no problem getting with no special device. I sent several e-Mai’s to Silicon Dust and no help. I am planning to return the device. What for. ???

There is a fault in the Miami broadcast. Installing the latest beta firmware for the HDHomeRun will make things work - we added special handling to work around the fault in the broadcast so you don't need to wait for the broadcaster to fix the problem.

To install the latest beta firmware install the beta Windows or Mac software:
Windows: https://download.silicondust.com/hdhome ... s_beta.exe
Mac: https://download.silicondust.com/hdhome ... c_beta.dmg

Nick

[Ryno32]

Now I can't tune any atsc 3 channels. I installed the beta software for Android shield TV but still nothing. I also have beta firmware. Any suggestions?

[toei]

Now I can't tune any atsc 3 channels. I installed the beta software for Android shield TV but still nothing. I also have beta firmware. Any suggestions?

i guess we are now like orlando(if im not wrong i just read other thread), and channels get encrypted. i cant tune anything right now.

[JimH]

We'll provide a few licenses for test purposes if someone wants to try JRiver.

viewtopic.php?p=389647#p389647

I'm jimh at jriver. Just send me a request.

[Ryno32]

I'll test for you