Same in Tigard. Fro the HDHomeRun logs, here's a comparison between the QUATRO CONNECT 4K and my 2-tuner CONNECT.
CONNECT 4K (HDHR5-4K | 20201023):
20201028-17:28:35 Tuner: tuner0 tuning 8.1 KGW (atsc3:569MHz-3)
20201028-17:28:40 HTTP: rejecting request from 192.168.1.22 - no video data
CONNECT (HDHR4-2US | 20200907):
20201028-17:30:31 Tuner: tuner0 tuning 8.1 KGW (8vsb:183MHz-3)
20201028-17:30:31 Tuner: tuner0 streaming http to 192.168.1.22:53930
Same thing for all of the ATSC3.0 stations I tried (2.1, 6.1, 10.1). Selected an ATSC1 station (10.2) and it tuned right in.
ATSC 3.0 Portland - 2020
-
- Posts: 182
- Joined: Thu Sep 06, 2018 3:08 pm
- Location: Portland, OR
- x 21
Re: ATSC 3.0 Portland: QUATRO 4K
Yeah, a channel rescan doesn't find any HEVC channels now...
Re: ATSC 3.0 Portland: QUATRO 4K
Same here. Thought it was just me. I'm in vancouver and tuning using physical channels, can't get any ATSC 3.0 channels to tune.
Re: ATSC 3.0 Portland: QUATRO 4K
Yep all gone.
Re: ATSC 3.0 Portland: QUATRO 4K
Can you please try manually tuning the physical channel using HDHomeRun Config GUI then posting a screenshot so I can see the PLP information.
Nick
Nick
Re: ATSC 3.0 Portland: QUATRO 4K
Is this what you are looking for? Here is what a command line scan for that frequency shows as well..
Code: Select all
SCANNING: 569000000 (us-bcast:30)
LOCK: atsc3 (ss=100 snq=100 seq=100)
PROGRAM 1: 49.1 KPDX
PROGRAM 2: 12.1 KPTV
PROGRAM 3: 8.1 KGW
PROGRAM 4: 10.1 KOPB

Re: ATSC 3.0 Portland: QUATRO 4K
EddieP - can you please do a 30s debug capture...
http://1080AAAC.local:5004/tuner0/ch30? ... uration=30
Nick
http://1080AAAC.local:5004/tuner0/ch30? ... uration=30
Nick
Re: ATSC 3.0 Portland: QUATRO 4K
I thought there was as well... At any rate, I submitted a comment on the KGW website for transmitter issues. If they get back to me I'll let you know.
Re: ATSC 3.0 Portland: QUATRO 4K
Nick,nickk wrote: ↑Thu Oct 29, 2020 8:07 am EddieP - can you please do a 30s debug capture...
http://1080AAAC.local:5004/tuner0/ch30? ... uration=30
Nick
Any insight based on the sample?
Re: ATSC 3.0 Portland: QUATRO 4K
I was able to reproduce the problem with the sample... now to figure out if the problem is us or them 
Nick

Nick
Re: ATSC 3.0 Portland: QUATRO 4K
The S-TSID in the broadcast for 49.1 KPDX is missing the @fileTemplate attribute on the FDT-Instance element.
ATSC A331-2020 section A.3.3.2.3 @fileTemplate states "The @fileTemplate attribute shall be present in the FDT-Instance element when the LCT Channel carries a sequence of DASH Media Segment files."
Nick
ATSC A331-2020 section A.3.3.2.3 @fileTemplate states "The @fileTemplate attribute shall be present in the FDT-Instance element when the LCT Channel carries a sequence of DASH Media Segment files."
Nick
-
- Posts: 28
- Joined: Wed Jun 07, 2017 10:25 am
- Device ID: 1080277F
- Location: Hillsboro, Oregon, USA
- x 6
- Contact:
Re: ATSC 3.0 Portland: QUATRO 4K
I'm an engineer with KATU... As far as I'm aware, no changes were made to the KRCW or KPTV ATSC 3.0 transmissions. I lost the ATSC 3.0 channels after upgrading to the latest firmware.