QNAP QPKG for DVR Record Engine
Re: QNAP QPKG for DVR Record Engine
Removed - see OP for correct version and link
Last edited by demonrik on Fri Oct 01, 2021 4:24 pm, edited 1 time in total.
Re: QNAP QPKG for DVR Record Engine
Hey demonrikdemonrik wrote:if it's still running - yes.Rew452 wrote:Using Qnaps defaults seem a better choice, so I would:
1. Shut down/stop HDHomeRun/HdHomeRunDVR then move share hdhomerun contents to HDHomeRunDVR share, Right? Can I use Qnaps File mgr to do this or what ?
And yep - File Manager works You can leave behind the hdhomerun_record and config file.
I would make sure you do this BEFORE the copying2. /share/CACHEDEV1_DATA/.qpkg/HDHomeRunDVR/HDHomeRunDVR.sh stopSounds good.3. Restart HDHomeRunDVR and all should be well.
Please verify and make any suggestions.
Thanks
Rew
I ended up waiting until this morning to make the move and most seems to work.
I did update to your 0.53e package before starting.
All my recordings show but now I can't record anything.
When I look at the record directory there is no HDHomeRun_record or config file, I did not copy them from old directory as you said; but they have not been re-created in the new HDHomeRunDVR. Is there some other issue that need to be fixed?
20160319-11:15:56System:server time = Sat Mar 19 11:15:56 2016 (correction of 0s)
20160319-11:15:56Recording:record Murder, She Wrote S02E21 19860413 [20160319-1100] on 241 (1000000 14)
20160319-11:15:56Recording:event download success
20160319-11:15:56Recording:disk space available = 3599GB
20160319-11:15:56Recording:current time = Sat Mar 19 11:15:56 2016 (correction of 0s)
20160319-11:15:56Recording:event Murder, She Wrote S02E21 19860413 [20160319-1100] creating new worker
20160319-11:15:56Recording:next timer event in 0h44m34s
20160319-11:15:56Recording:sending request to 13176341 at 192.168.1.148 for Murder, She Wrote S02E21 19860413 [20160319-1100]
20160319-11:15:56Recording:failed to create dir for Murder, She Wrote Murder, She Wrote S02E21 19860413 [20160319-1100]
Thanks
Rew
Re: QNAP QPKG for DVR Record Engine
You won't see the binary or config file in the recordings folder.
They are installed in the app folder
That kind of error is usually permissions related.
Since you have a logfile the engine clearly has permissions to write to the main folder.
Am guessing you copied over recordings?
Was there a 'Murder, She Wrote' in those previous recordings?
If so, am betting the permissions are set so only admin user is only user allowed to right, but we need to allow the Web user, so need group permissions, so run
Then try another recording
Also, can you post the output of
Just in case there is something else
They are installed in the app folder
Code: Select all
/share/CACHEDEV1_DATA/.qpkg/HDHomeRunDVR
Since you have a logfile the engine clearly has permissions to write to the main folder.
Am guessing you copied over recordings?
Was there a 'Murder, She Wrote' in those previous recordings?
If so, am betting the permissions are set so only admin user is only user allowed to right, but we need to allow the Web user, so need group permissions, so run
Code: Select all
chmod -R g+w /share/Recordings/HDHomeRunDVR
Also, can you post the output of
Code: Select all
ls -l /share/Recordings/HDHomeRunDVR
Re: QNAP QPKG for DVR Record Engine
Thanks, looks like permissions was the key; chmod -R g+w /share/Recordings/HDHomeRunDVR
Look like all is well now.
Rew
Look like all is well now.
Rew
Re: QNAP QPKG for DVR Record Engine
Yeah!!Rew452 wrote:Thanks, looks like permissions was the key; chmod -R g+w /share/Recordings/HDHomeRunDVR
Look like all is well now.
Rew
Enjoy
Re: QNAP QPKG for DVR Record Engine
Removed - see OP for correct version and link
Last edited by demonrik on Fri Oct 01, 2021 4:24 pm, edited 1 time in total.
Re: QNAP QPKG for DVR Record Engine
Hey, demonrik any chance you will have an updated qpkg for the latest release?
Also, can you please put together a step by step guide to updating Qnap' s Qpkg for HDHomeRunDVR, have downloaded SDK and HDHomeRun master but still a little shaky about creating the updated Qpkg, could use some guidance.
Thanks again for you fine efforts.
Rew
Also, can you please put together a step by step guide to updating Qnap' s Qpkg for HDHomeRunDVR, have downloaded SDK and HDHomeRun master but still a little shaky about creating the updated Qpkg, could use some guidance.
Thanks again for you fine efforts.
Rew
Re: QNAP QPKG for DVR Record Engine
Already posted 1 post above you -> 0.5.3fRew452 wrote:Hey, demonrik any chance you will have an updated qpkg for the latest release?
It's actually in the README..Also, can you please put together a step by step guide to updating Qnap' s Qpkg for HDHomeRunDVR, have downloaded SDK and HDHomeRun master but still a little shaky about creating the updated Qpkg, could use some guidance.
Thanks again for you fine efforts.
Rew
If you don't want to change the parameters, and you've installed the QDK it's very straight forward
- execute fetch_record_engine.sh to download the latest DVR engine
- execute qbuild to build the QPKG
- to install manually simply run 'sh build/HDHomeRunDVR_<version>.qpkg
-
- Posts: 50
- Joined: Sat Sep 22, 2007 3:01 pm
Re: QNAP QPKG for DVR Record Engine
Rew452 wrote:Hey, demonrik any chance you will have an updated qpkg for the latest release?
I think maybe he was referring to 20160328atest2 .. Thxdemonrik wrote:Already posted 1 post above you -> 0.5.3f
Re: QNAP QPKG for DVR Record Engine
Ahh..thevoiceover wrote: I think maybe he was referring to 20160328atest2 .. Thx
I don't create a build until @nickk updates the changelog in case it gets pulled.
Re: QNAP QPKG for DVR Record Engine
Thanks, and sorry somehow I was thinking the yesterday's update was a record engine update when it was a firmware update for the tuners.
My background is limited in linux, give me dos and windows I am fine. So please forgive my ignorance.
I need some more detail if you don't mind please.
I did install Qdk and it said it installed; so I think that ok but the rest is were I am unclear.If you could fill in a bit for me I would really appreciate.
Use putty, right?
1. Once you have cloned the package to your system.
How do I clone the package?
2. cd to the QDK project directory
Did cloning the package create this or do I?
3. Run the fetch_record_engine.sh script to get the latest DVR binary from SiliconDust
4. Build the QPKG with 'qbuild --force-config'
Thanks
Rew
My background is limited in linux, give me dos and windows I am fine. So please forgive my ignorance.
I need some more detail if you don't mind please.
I did install Qdk and it said it installed; so I think that ok but the rest is were I am unclear.If you could fill in a bit for me I would really appreciate.
Use putty, right?
1. Once you have cloned the package to your system.
How do I clone the package?
2. cd to the QDK project directory
Did cloning the package create this or do I?
3. Run the fetch_record_engine.sh script to get the latest DVR binary from SiliconDust
4. Build the QPKG with 'qbuild --force-config'
Thanks
Rew
Re: QNAP QPKG for DVR Record Engine
you will also need to install the 'git' qpkg from the appcenterRew452 wrote:I did install Qdk and it said it installed; so I think that ok but the rest is were I am unclear.If you could fill in a bit for me I would really appreciate.
This will be how you clone the repository and/or contribute back.
That's what I use - but any method you have to open an ssh session on the NAS will do.Use putty, right?
This is why you need git1. Once you have cloned the package to your system.
How do I clone the package?
decide where you want to keep the QDK project.. I have a subfolder in /share/Public called /share/Public/Projects
cd to that folder and then execute
Code: Select all
git clone https://github.com/Silicondust/dvr_install.git
Yes - it will be <projects>/dvr_install/qnap2. cd to the QDK project directory
Did cloning the package create this or do I?
You don't have to use the --force-config any more - just qbuild with no options.3. Run the fetch_record_engine.sh script to get the latest DVR binary from SiliconDust
4. Build the QPKG with 'qbuild --force-config'
Once you run qbuild you should have a new package built in <projects>/dvr_install/qnap/build
you can either install it through the app center or simply execute it, e.g.
Code: Select all
sh builds/HDHomeRunDVR_0.5.3f.qpk
Re: QNAP QPKG for DVR Record Engine
also - I just checked and fetching the latest does return a new build of the engine
There is nothing in the changelog, but the version is 20160328atest2.
New package uploaded to my google drive for v0.5.3g with the latest engine
There is nothing in the changelog, but the version is 20160328atest2.
New package uploaded to my google drive for v0.5.3g with the latest engine
Re: QNAP QPKG for DVR Record Engine
You are the Man!
Thanks, I will work with it tomorrow, did not see this until to late for tonight, It looks straight forward to me now but may have questions hopefully you won't mind.
thanks
Rew
Thanks, I will work with it tomorrow, did not see this until to late for tonight, It looks straight forward to me now but may have questions hopefully you won't mind.
thanks
Rew
Re: QNAP QPKG for DVR Record Engine
Not at all.. Ask away.Rew452 wrote:You are the Man!
Thanks, I will work with it tomorrow, did not see this until to late for tonight, It looks straight forward to me now but may have questions hopefully you won't mind.
thanks
Rew
If you want more interactive, I'm on discord most of the time.
Created channel https://discord.gg/0uzKaTiMjCwvanxM to support this