Only 1 channel of audio on ATSC 3 AND 1 channels - Windows client

ATSC 3.0 Forum
Post Reply
yourpalfranc
Posts: 27
Joined: Sat Jan 06, 2018 11:01 am

Only 1 channel of audio on ATSC 3 AND 1 channels - Windows client

Post by yourpalfranc »

I made this post last week after upgrading to the latest app and firmware...viewtopic.php?f=133&t=75022

However, I was only testing the ATSC 3 in my market.

As I ran the Windows 10 app just now to watch some TV, I've noticed that I have only 1 channel of audio on ALL stations. Well I can't say I tested all 60+ channels, but I tested several.

I've never noticed this issue on ATSC 1 channels before. Any ideas?? Thanks!

Also, I did test my Nvidea Shield android app, and it appears to be normal for ATSC 1 channels.

csdesigns
Posts: 75
Joined: Thu Jun 20, 2019 2:21 pm
x 21

Re: Only 1 channel of audio on ATSC 3 AND 1 channels - Windows client

Post by csdesigns »

Do you mean 1 audio channel, or 1 audio track? If you’re only hearing a mono channel, and watching content that should be providing 5.1 or at least 2.0, then yeah, that is extremely odd. If you’re routing audio from your Shield to a receiver, maybe check you didn’t accidentally enable mono mode or such. You can also verify audio decoding on the Shield with the native Live Channels app, or other clients such as Plex or Channels DVR.

Post Reply