QNAP QPKG for DVR Record Engine

Downloads & Instructions
Post Reply
toricred6
Posts: 65
Joined: Sat Feb 15, 2020 8:59 am
x 1

Re: QNAP QPKG for DVR Record Engine

Post by toricred6 »

What's the easiest way to move the .conf file? I'm in the process of removing Volume1 on StoragePool1 to replace all the 4TB disks (currently in a RAID0) with 8TB disks.

demonrik
Posts: 1447
Joined: Mon May 04, 2015 10:03 am
Device ID: 108042A1, 10814D8E
x 25

Re: QNAP QPKG for DVR Record Engine

Post by demonrik »

toricred6 wrote: Thu Aug 12, 2021 1:21 pm What's the easiest way to move the .conf file? I'm in the process of removing Volume1 on StoragePool1 to replace all the 4TB disks (currently in a RAID0) with 8TB disks.
Is more than just the conf file to be migrated.
My recommendation since removal is non-destructive is to remove the package and reinstall once you've resolved the volumes, and then patch the conf file by updating the params and restarting.
You don't lose anything important by doing so.

vandey
Posts: 9
Joined: Mon Sep 29, 2014 7:08 am

Re: QNAP QPKG for DVR Record Engine

Post by vandey »

So I installed the latest verison, and with the qlocker issue i had I fully restored my NAS (factory reset), then installed this app, I turned off all outside internet access to my NAS to prevent these issues like qlocker in the future. However now when I try to navigate to MY.LOCAL.IP.ADDRESS/HDHomeRunDVR/ I get the 403 Forbidden page. I just uninstalled 1.0.4, and reinstalled 1.0.5 still getting the 403 page. Was this removed?

EDIT: It was asking for credentials to login... Is this normal?

demonrik
Posts: 1447
Joined: Mon May 04, 2015 10:03 am
Device ID: 108042A1, 10814D8E
x 25

Re: QNAP QPKG for DVR Record Engine

Post by demonrik »

vandey wrote: Fri Aug 27, 2021 9:33 am So I installed the latest verison, and with the qlocker issue i had I fully restored my NAS (factory reset), then installed this app, I turned off all outside internet access to my NAS to prevent these issues like qlocker in the future. However now when I try to navigate to MY.LOCAL.IP.ADDRESS/HDHomeRunDVR/ I get the 403 Forbidden page. I just uninstalled 1.0.4, and reinstalled 1.0.5 still getting the 403 page. Was this removed?

EDIT: It was asking for credentials to login... Is this normal?
not normal.
You have a broken Web Server.
Make sure the Web server is enabled, and ports are opened in the firewall to local traffic (src address in your local subnet, e.g. 192.168.0.1/24)

jim_a
Posts: 141
Joined: Fri Jul 10, 2009 11:36 am

Re: QNAP QPKG for DVR Record Engine

Post by jim_a »

Is there any way to edit the first post to point to the current qpkg files?
I needed to update the recording engine and thought the files in the link were current. :(
Even if you can’t edit it someone at Silicondust should be able to do something.

demonrik
Posts: 1447
Joined: Mon May 04, 2015 10:03 am
Device ID: 108042A1, 10814D8E
x 25

Re: QNAP QPKG for DVR Record Engine

Post by demonrik »

jim_a wrote: Tue Sep 14, 2021 5:06 pm Is there any way to edit the first post to point to the current qpkg files?
I needed to update the recording engine and thought the files in the link were current. :(
Even if you can’t edit it someone at Silicondust should be able to do something.
The links are current.

Post Reply