Want to write your own code to work with a HDHomeRun or work with the HDHomeRun DVR? We are happy to help with concepts, APIs, best practices.
4 posts • Page 1 of 1
The lineup.xml file provided from the tuner's IP address has no information about the rf channel associated with a given guide number and it appears that the IP address channel scan simply ignores duplicate VC assignments, such we have in the Bay Area for FOX (2.x) and ABC (7.x). Am I missing a key something here or is creating ones own scan file using hdhomerun_config.exe and eschewing the vchannel command the only way to allow access to such duplicates?
Well, it does if you include the ?tuning value criteria [yes, these criteria/selectors are not well documented]The lineup.xml file provided from the tuner's IP address has no information about the rf channel associated with a given guide number
It does not ignore them, but it will choose the freq/program which has the "best" signal and report only that one for each major/minor. There is no way to access the "less best" channel. Of course, there are specific cases where "best" is not really "best" for your situation. There are understood solutions to influence "best", but they are not always easy or cheap to implement depending on the specifics. I suspect (I am not going to spend time on the FCC site right now) that in addition to the main transmitter frequencies changing (which will impact "best"), some of the translators (as I recall that includes at least the Fox one) are going to be changing (which will also impact "best"), so things will get different soonish (well, soonish in geologic time scales, as in early/mid 2020), so do not expect anything to stay especially stable.and it appears that the IP address channel scan simply ignores duplicate VC assignments
If your solution needs access to tune to a specific freq/program you need to look elsewhere than the lineup.json at this time.
It should be noted that there have been hints that at some point in the future a future enhancement may be released which will allow one to chose alternative network id sources (this turns out to be especially important in the UK for freeview where it has been asked for since close to day zero). When any such capability might be available (or whether it would address your specifics) is unknown, so if you need something now, look to alternatives (likely via the libhdhomerun API).
Where did you find that, if I may ask? Are these parameters documented at all?Well, it does if you include the ?tuning value criteria [yes, these criteria/selectors are not well documented]
[removed by moderator]
Who is online
Users browsing this forum: No registered users and 2 guests