I'm having problems tuning DVB-T2 channels in my HDHR5-4DT device.
First of all, I want to explain the situation about how my TV provider is broadcasting some TV channels.
The TV provider is broadcasting some of their channels in frequencies that are, let's say, out of europe standard.
It is using:
DVB-T2: 122, 130, 138, 146, 154, 162, 170, 178, 186, 194, 202, 210 MHz
DVB-T (out of standard): 330, 338, 346, 354, 362, 370, 378, 386, 394, 402, 410, 418, 426, 434, 442, 450, 458, 466 MHz
DVB-T: Frequencies in the standard
With this situation, it doesn't fit with channel mapping inside HDHR.
I tried to change the channel mapping to a custom one, but I didn't find a proper way to do it
- Small question: Is it possible to create a custom channel mapping?
I would like to have virtual channels and be able to watch these channels in the app.
To watch these channels I normally use the http api
when I try to use it with DVB-T2 frequencies I am not able to use this method
I was checking in the web portal and i saw this
the Modulation Lock is set to none
Next step was to use hdhomerun_config to check the streams and see what is happening
hdhomerun_config DEADBEEF set /tuner0/channel auto:210000000
hdhomerun_config DEADBEEF get /tuner0/streaminfo
The answer was none
hdhomerun_config DEADBEEF set /tuner0/channel auto8t:210000000
6100: 0 Channel 1 (encrypted)
6110: 0 Channel 2
6120: 0 Channel 3
6130: 0 Channel 4
onid = Data2
hdhomerun_config DEADBEEF set /tuner0/program 6120
Observing it in web portal
The Modulation Lock is set to t8dvbt2
In conclusion, maybe something is not working as expected with http api or maybe I’m doing something wrong
Can you help me with this?
Thank you in advance
Reception, channel detection, network issues, CableCARD setup, etc.
1 post • Page 1 of 1