ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Reception, channel detection, network issues, CableCARD setup, etc.
Post Reply
ioan.rosca
Posts: 4
Joined: Tue Mar 24, 2020 7:45 am

ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by ioan.rosca » Tue Mar 24, 2020 7:50 am

The same has happened to me. After restarting a few times I have got the hdhomerun to work, but I can't get it to go on TvHeadend. What version of TvHeadend do you have? What exactly have you done to make it work for you? Can i downgrade to prevoius version?

____Google Translate from Spanish______

NedS
Silicondust
Posts: 808
Joined: Mon Dec 10, 2018 12:38 pm

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by NedS » Tue Mar 24, 2020 11:59 am

Try changing modulation to "Auto" in Tvheadend.

ioan.rosca
Posts: 4
Joined: Tue Mar 24, 2020 7:45 am

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by ioan.rosca » Tue Mar 24, 2020 4:14 pm

Try changing modulation to "Auto" in Tvheadend.
I´m not able to change it...

I always get this:

Tvheadend ip:10.0.1.3 log:

Code: Select all

2020-03-24 23:10:33.863 tvhdhomerun: tuning to t8qam64:786000000
2020-03-24 23:10:33.864 tvhdhomerun: failed to tune to t8qam64:786000000
2020-03-24 23:10:33.865 mpegts: 746MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #1 (10.0.1.5)
2020-03-24 23:10:33.865 tvhdhomerun: tuning to t8qam64:746000000
2020-03-24 23:10:33.866 tvhdhomerun: failed to tune to t8qam64:746000000
2020-03-24 23:10:33.867 mpegts: 626MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #1 (10.0.1.5)
2020-03-24 23:10:33.867 tvhdhomerun: tuning to t8qam64:626000000
2020-03-24 23:10:33.868 tvhdhomerun: failed to tune to t8qam64:626000000
2020-03-24 23:10:42.475 mpegts: 674MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #1 (10.0.1.5)
2020-03-24 23:10:42.475 tvhdhomerun: tuning to t8qam64:674000000
2020-03-24 23:10:42.477 tvhdhomerun: failed to tune to t8qam64:674000000
2020-03-24 23:10:48.780 mpegts: 610MHz in Red DVB-T - scan no data, failed
2020-03-24 23:10:48.780 subscription: 0003: "scan" unsubscribing
2020-03-24 23:10:49.780 mpegts: 674MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #0 (10.0.1.5)
2020-03-24 23:10:49.780 tvhdhomerun: tuning to t8qam64:674000000
2020-03-24 23:10:49.781 tvhdhomerun: failed to tune to t8qam64:674000000
2020-03-24 23:10:58.780 mpegts: 610MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #0 (10.0.1.5)
2020-03-24 23:10:58.780 tvhdhomerun: tuning to auto:610000000
2020-03-24 23:10:58.807 subscription: 0015: "scan" subscribing to mux "610MHz", weight: 2, adapter: "HDHomeRun DVB-T Tuner #0 (10.0.1.5)", network: "Red DVB-T", service: "Raw PID Subscription"
2020-03-24 23:11:13.799 mpegts: 610MHz in Red DVB-T - scan no data, failed
2020-03-24 23:11:13.799 subscription: 0015: "scan" unsubscribing
2020-03-24 23:11:14.799 mpegts: 674MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #0 (10.0.1.5)
2020-03-24 23:11:14.799 tvhdhomerun: tuning to t8qam64:674000000
2020-03-24 23:11:14.801 tvhdhomerun: failed to tune to t8qam64:674000000
2020-03-24 23:11:23.814 mpegts: 610MHz in Red DVB-T - tuning on HDHomeRun DVB-T Tuner #0 (10.0.1.5)
2020-03-24 23:11:23.814 tvhdhomerun: tuning to auto:610000000
2020-03-24 23:11:23.843 subscription: 0017: "scan" subscribing to mux "610MHz", weight: 2, adapter: "HDHomeRun DVB-T Tuner #0 (10.0.1.5)", network: "Red DVB-T", service: "Raw PID Subscription"
Device ip:10.0.1.5 log:

Code: Select all

19700101-00:00:00 System: reset reason = power on
19700101-00:00:02 System: network link 100f
19700101-00:00:03 System: ip address obtained: 10.0.1.5 / 255.255.255.0
20200324-22:57:27 System: time changed from Thu Jan  1 00:00:21 1970 to Tue Mar 24 22:57:27 2020
20200324-22:59:32 Tuner: tuner1 tuning 5038 laSexta (t8dvbt:626MHz-152)
20200324-22:59:33 Tuner: tuner1 streaming http to 10.0.1.109:60255
20200324-22:59:38 Tuner: tuner1 http stream ended (remote closed)
20200324-22:59:38 Tuner: tuner1 tuning 5037 laSexta HD (t8dvbt:626MHz-151)
20200324-22:59:38 Tuner: tuner1 streaming http to 10.0.1.109:60269
20200324-23:03:13 Tuner: tuner1 http stream ended (remote closed)
20200324-23:05:01 Tuner: tuner0 streaming udp to 10.0.1.3:39399
20200324-23:05:10 Tuner: tuner0 udp stream ended (stop request)
20200324-23:05:25 Tuner: tuner0 streaming udp to 10.0.1.3:36845
20200324-23:05:35 Tuner: tuner0 udp stream ended (stop request)
20200324-23:14:49 Tuner: tuner0 streaming udp to 10.0.1.3:34399
20200324-23:14:59 Tuner: tuner0 udp stream ended (stop request)
20200324-23:16:03 Tuner: tuner0 streaming udp to 10.0.1.3:41864
20200324-23:16:14 Tuner: tuner0 udp stream ended (stop request)
20200324-23:17:48 Tuner: tuner0 streaming udp to 10.0.1.3:58421
20200324-23:17:54 Tuner: tuner0 udp stream ended (stop request)
20200324-23:18:56 Tuner: tuner0 streaming udp to 10.0.1.3:54260
20200324-23:19:09 Tuner: tuner0 udp stream ended (stop request)
Before upgrade everithing was working great.

NedS
Silicondust
Posts: 808
Joined: Mon Dec 10, 2018 12:38 pm

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by NedS » Tue Mar 24, 2020 6:11 pm

In the Tvheadend interface -> DVB Inputs -> Muxes

ioan.rosca
Posts: 4
Joined: Tue Mar 24, 2020 7:45 am

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by ioan.rosca » Tue Mar 24, 2020 6:21 pm

There is no option to change modulation
Image
Image

In tvh wiki i found a post where say that modulacion can not be changed.
https://tvheadend.org/projects/tvheaden ... figuration

nickk
Silicondust
Posts: 15755
Joined: Tue Jan 13, 2004 9:39 am

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by nickk » Tue Mar 24, 2020 6:50 pm

Hi,

We have a beta release in QA testing which adds backward compatibility to support what Tvheadend is doing.

The beta release should be posed tomorrow.

Nick

ioan.rosca
Posts: 4
Joined: Tue Mar 24, 2020 7:45 am

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by ioan.rosca » Wed Mar 25, 2020 5:41 am

How can i activate beta releases for my device? I really need tvheaend with Hdhomerun working. Previoues firmware was working great.

cojms1
Posts: 1
Joined: Fri Mar 27, 2020 1:58 am

Re: ioan.rosca - Bricked HDHomeRun CONNECT QUATRO after firmware upgrade ?

Post by cojms1 » Fri Mar 27, 2020 2:02 am

I'm seeing this problem too - only spotted recently as I don't always run through tvheadend. Only seems to be affecting some muxes though - 2 muxes work but the rest don't.

Is there any news on the beta firmware at all?

Post Reply