I ran additional tests with a different TA/cable card/prime. Note: prior test without TA wasn’t valid because TA was off and prime was connected through the TA :( Prime ID: 1319A5BA 9/27/2021 (MONDAY) Times approximate EDT. Using Shield TV to view 2:29 PM EDT scan without TA (USB disconnected) 239 c...

Device ID 131B7B1D 6:59 EDT (9/20/2021) started channel scan with TA 534 channels found 62,63 and 66 don’t show DRM 8:20 tried channel 62 8:21 channel 63 8:22 channel 66 8;26 TA disconnected – restarted the Prime 8:28 started channel scan without TA Total of 147 channels found – none of the problem ...

I ran some tests with the TA unplugged (from the wall) Only 150 channels were found (534 are found with the TA but at least one third are duplicates). Only channel 66 (MTVHD) was found. It was not marked as DRM and still could not be viewed with either Windows 10 or the Shield TV. :( It is possible ...

Shutting down the DVR doesn’t help – I just tried again. :( Most Spectrum channels in zip code 33706 (St. Petersburg FL) are not DRM. All channels require a cable card (no clear QAM). DRM is copy (record) protection. Cable card is authorization /encryption. As noted in my first post I also have two ...

The high number versions (1306,1225,1301) that work indicate DRM in the channel lineup.
The fact that Windows media center correctly handles these channels suggests this is not a Spectrum problem.
Note: Send diagnostics is currently off but I can turn it back on if there is something else to try.

Windows 10 can and the Shield TV can view the “HD” version of all three Old New “SD” “HD” 62 VH1HD 1306 63 TWCHD 1225 66 MTVHD 1301 Note: when HD TV first became available, they were assigned to channel numbers above 1000 and the original analog SD remained available. For example: local SD were mapp...

To be clear I tried to play the recorded file with PowerDVD and it reported that the recording is copy protected.
I don’t know how to try to view live TV with PowerDVD.

I used Windows (8.1) media center to record about an hour on channel 63 (TWCHD).
Media center indicates the recording is copy protected.
Media center can play the recording but Powerdvd 20 indicates it is copy protected.
VLC crashes when I try to play it.

Is there any way to edit the first post to point to the current qpkg files?
I needed to update the recording engine and thought the files in the link were current.
Even if you can’t edit it someone at Silicondust should be able to do something.

I updated the DVR manager qpkg to 1.0.5 and the record engine to 20210624. Is 20210624 current? I had tried updating earlier but the link at the beginning of the thread points to older versions such as 0.10.7 I also did a software reset of the prime. I verified that send diagnostic info was still en...

Device Id is 131B7B1D I rescanned in windows 10 earlier I turned on send diagnostics I also rescanned using the channel lineup page. The channels still aren’t flagged DRM in the channel lineup. Windows 10 and the android boxes still can’t view them. Note: VLC launched from the setup program can’t vi...

Wundows 8.1 (that works) is Windows media center, not the SD app – I should have made the clear. I ran the channel scan yesterday through the tuner’s web interface. Running the scan on the Windows 10 PC now. Could you clarify this? "It can also happen if the channel should be DRM and isn't mark...

Spectrum cable TV service Hdhomerun prime with Cisco cable card and tunning Adapter Can’t view some channels on either Windows or android TV box. All channels work fine Windows 8.1 and Spectrum STB Channels are not marked DRM. (all the channels marked DRM I have tried are OK) Get various errors Audi...

Have you tried the manual NAS install?
FYI: my NAS is the older 231 (without the P) and has a different processor than your NAS.
I am running two 6TB WD NAS drives in raid one

I installed the new version.
Auto start working based on one reboot test.
Thanks.