Can you remove the LTE filter, enable the Send diagnostic information on the web page for your HDHomeRun, run a channel scan, and reply back with the device ID for it so we can see what it looks like?

It's unlikely that an LTE filter would actually do anything for the SmartKom. It's not like a ...

That sounds like it might not be accounting for timezone correctly, especially if you are in Mountain time where 5pm matches up to midnight UTC. Reported to the team to review.

Docker is definitely the best option for QNAP. There are some instructions at https://github.com/demonrik/HDHR-DVR-docker/wiki/Updating-from-the-QNAP-QPKG-to-Container for converting from the old QPKG install to Docker, but a clean install is basically the same thing except you also need to create a ...

Performance of a wireless bridge is going to depend primarily on what is between the bridge and the router it is connecting to. If you're trying to connect different floors, ideally the bridge would be located directly above the router. The further away it gets, the more stuff the signal has to pass ...

Probably multipath interference, where the antenna receives the broadcast signal from multiple directions, both the direct one straight from the broadcast tower and also others reflecting off something. Since the reflections take slightly longer to reach the antenna than the direct signal, they ...

ATSC 3.0 adds a new (to North America) feature called physical layer pipes (PLPs), which allows the signal to be divided up into different sub-signals that fall at different points along a line between "easy to receive but low data rate" and "hard to receive but higher data rate", vs. ATSC 1.0 that ...

Which antenna is it?

What zip code are you in?

Is the HDHomeRun located at least 3 feet away from other electronic devices, especially anything that sends or receives signals (modems, routers, radios, hotspots, baby monitors, etc.)?

Are these proper Android TV/Google TV boxes or Chinese hacked up AOSP shoehorned on a box devices?

The log data doesn't go back far enough to tell us what happened with 9-1-1. If you encounter another that doesn't record (or hasn't recorded since Friday), please let us know the details and we will review.

I'm having trouble finding logs of playing that channel for any significant length of time. Please watch it for at least 10 minutes then reply back with the time you did so I can locate it in the logs.

Here is what I am seeing currently as of 8pm MT.
KMEEDT/KEJRLD are showing the ET/CT schedule for MeTV.
KMEEDT2/KERJLD2 are showing the ET/CT schedule for MeTV+
KMEEDT3 is showing the ET/CT schedule for Story. KERJLD3 has been hitting the bong and is now 2 hours ahead of eastern time.
40.4 is set to ...

Best to only do it on a wired connection. Wifi will be unhappy since it has to operate at significantly reduced speeds to make sure that any theoretical receivers can receive it. Probably should have mentioned that :lol:. I have one old switch that can't handle high data rate multicast/broadcast and ...

https://www.rabbitears.info/market.php? ... iv#station

The aux (DTX) is 1000kW at 840' above ground level, while the primary is 720kW at 1015' AGL. There is almost no difference between them except at the fringes of the coverage area and in the wedge behind the tower.

Trip, have you tuned PLP0 via the CLI and set the target to forward and watched either the network rate in Config GUI or monitored via Wireshark to see if there's anything actually on there?

hdhomerun_config xxxxxxxx set /tuner0/channel atsc3:25:0
hdhomerun_config xxxxxxxx set /tuner0/target ...

I'm assuming that word that was blocked out starts with a K. Are you running the current version? We have been doing some cleanup to old DVR systems. Some of the old addon versions pointed to a historical address for the guide data system that is no longer available. The current addons have been ...