Search found 193 matches
- Thu Oct 31, 2024 6:04 pm
- Forum: Guide Issues
- Topic: Oct 18 Dateline NBC did not record
- Replies: 7
- Views: 1507
Re: Oct 18 Dateline NBC did not record
Design decision to minimize clutter.
- Thu Oct 31, 2024 5:59 pm
- Forum: ATSC 3.0 Forum
- Topic: Las Vegas - Channel 29 or Channel 1?
- Replies: 10
- Views: 773
Re: Las Vegas - Channel 29 or Channel 1?
The HDHomeRun automatically tunes whichever PLP is required (including multiple PLPs simultaneously) for the particular virtual channel number being accessed.
- Wed Oct 30, 2024 5:05 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: Error: No HDHomeRun tuners found (iOS)
- Replies: 9
- Views: 681
Re: Error: No HDHomeRun tuners found (iOS)
On Mac, go into System Settings > Privacy and Security > Local Network and make sure the HDHomeRun app is enabled. We're seeing an issue where the prompt for this isn't coming up on iOS 18.1 and our engineering team is investigating.
- Wed Oct 30, 2024 4:46 pm
- Forum: ATSC 3.0 Forum
- Topic: Las Vegas - Channel 29 or Channel 1?
- Replies: 10
- Views: 773
Re: Las Vegas - Channel 29 or Channel 1?
I would assume that this is a bug in the third party app you're using, probably that it is parsing the "ch=atsc3:587000000:1" bit of the tuner status as channel 1 instead of PLP 1 on 587 MHz (channel 33).
- Thu Oct 24, 2024 4:58 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: nVidia Shield PRIME and DRM Model Issues
- Replies: 14
- Views: 1058
Re: nVidia Shield PRIME and DRM Model Issues
Can you enable the sending of diagnostic data in the app on one of the non-working devices, try to watch a DRM channel, then reply back with the device ID for your HDHomeRun?
- Thu Oct 24, 2024 4:55 pm
- Forum: Guide Issues
- Topic: Guide Issue Antenna TV/MeTV Toons , Fresno CA
- Replies: 3
- Views: 1396
Re: Guide Issue Antenna TV/MeTV Toons , Fresno CA
43.5 switched to the Pacific feed for MeTV Toons.
- Wed Oct 23, 2024 4:11 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: servio stopped recording
- Replies: 6
- Views: 1613
Re: servio stopped recording
Go into the HDHomeRun Setup program, DVR tab, uncheck the box to use the PC for recording, and click OK.
- Wed Oct 23, 2024 4:09 pm
- Forum: HDHomeRun Software Setup & Troubleshooting (Live & DVR)
- Topic: Have to change cable card...
- Replies: 5
- Views: 1353
Re: Have to change cable card...
Assuming this is a Cisco/Technicolor card, check the CableCARD CA screen and see if it shows Status: Not Staged. This means the conditional access system on the card is disabled, so it will not access any encrypted channels. The provider will need to send the appropriate signal to change that to Rea...
- Tue Oct 22, 2024 4:01 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: What could be going on with my Flex 4k?!?
- Replies: 27
- Views: 4175
Re: What could be going on with my Flex 4k?!?
Is the FLEX at least 3' away from any router/switch/wireless devices? If so, please open a ticket with a link to this thread and we'll get it replaced.
https://www.silicondust.com/support/trouble-ticket/
https://www.silicondust.com/support/trouble-ticket/
- Tue Oct 22, 2024 3:59 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: Channels missing after replacing Extend w/Flex
- Replies: 4
- Views: 716
Re: Channels missing after replacing Extend w/Flex
The CHSN channels in Chicago are H.264, and if you have transcode enabled on the EXTEND, it gets confused and won't work. It needs a firmware fix to completely fix the problem, but just disabling transcode should allow them to work.
- Tue Oct 22, 2024 3:54 pm
- Forum: HDHomeRun Software Setup & Troubleshooting (Live & DVR)
- Topic: Network discovery problems when on mesh network
- Replies: 3
- Views: 1017
Re: Network discovery problems when on mesh network
Usually when using a mesh system, you want everything to be part of the same family of devices and the primary node should be the router. Mixing a mesh setup with a completely separate router usually just leads to headaches.
- Mon Oct 21, 2024 5:48 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: Is it possible to move recordings off of Servio?
- Replies: 1
- Views: 621
Re: Is it possible to move recordings off of Servio?
If there are only a few you want, you can download them over the network by going to the web page for the SERVIO at http://deviceid.local where deviceid is the 8 digit device ID for the SERVIO, then clicking on Recorded Files, then the show, then the episode. If there are a lot you want to move, it ...
- Mon Oct 21, 2024 5:40 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: What could be going on with my Flex 4k?!?
- Replies: 27
- Views: 4175
Re: What could be going on with my Flex 4k?!?
idk I’ve had it in my room and my network box(which is closer to the antenna) with the same issue. I have the Quatro plugged in right now because the Flex is useless to me right now, is it doing the same? I'm not seeing a time when it was tuned but not streaming. You can check yourself using the hd...
- Mon Oct 21, 2024 5:33 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: Receive Issues CBS and NBC Only
- Replies: 7
- Views: 943
Re: Receive Issues CBS and NBC Only
It's a much better UHF antenna than it is a VHF antenna. The loop and the reflector unit at the back are for VHF (and are undersized for VHF, at that, curious sizing decision there), while everything else is UHF. More UHF elements mean more gain and directionality compared to VHF. I would replace th...
- Mon Oct 21, 2024 5:16 pm
- Forum: HDHomeRun Hardware Setup & Troubleshooting
- Topic: servio stopped recording
- Replies: 6
- Views: 1613
Re: servio stopped recording
Please download https://download.silicondust.com/hdhomerun/hdhomerun_hdd_firmware_20240506.bin , which is a new firmware version for the SERVIO. Then, on the Windows PC, open File Explorer, go into the C drive, then Program Files, then Silicondust, then HDHomeRun and open the hdhomerun_config_gui pr...