Search found 209 matches

by signcarver
Sun Mar 17, 2024 1:25 pm
Forum: Guide Issues
Topic: Outlaw Channel not Scanning
Replies: 7
Views: 98

Re: Outlaw Channel not Scanning

Well there is another 10.6 for outlaw that is up so unless we know which market that may not be the case but I strongly suspect it is. I seem to recall a translator/repeater for KTTC didn't repeat all the subchannels it has.
by signcarver
Sun Mar 17, 2024 11:36 am
Forum: HDHomeRun Hardware Setup & Troubleshooting
Topic: hdhomerun signal App
Replies: 1
Views: 56

Re: hdhomerun signal App

KRCR has (virtual) 7.1 which is abc, 7.2 which is TBD, 7.3 which is comet and 20.1 which is fox (at physical 7.3, 7.4. 7.5, and 7.6) the signal strength and quality will be the same for any of those channels when tuned to physical channel 7. I believe they are also on physical channel 34 carrying (v...
by signcarver
Wed Mar 13, 2024 5:06 pm
Forum: HDHomeRun Hardware Setup & Troubleshooting
Topic: Flex Duo Pixelating Badley and Voice/Video Not In Sync
Replies: 7
Views: 226

Re: Flex Duo Pixelating Badley and Voice/Video Not In Sync

What exact model of express as many only support 2.4GHz wifi (some are supposed to but only with certsin channels so some routers need to be manually configured to use only certain 5ghz channels or have features disabled as it gives the appearance of ) which often results in poor performance of mpeg...
by signcarver
Mon Mar 11, 2024 12:52 pm
Forum: HDHomeRun Software Setup & Troubleshooting (Live & DVR)
Topic: AppleTV App Cannot See HDHR-US
Replies: 9
Views: 294

Re: AppleTV App Cannot See HDHR-US

What about the other official app platforms... The HDHomeRun app on appletv is different than any of the other HDHomeRun apps but I believe it should work (unlike platforms such as roku which would be reliant on http streaming which the legacy device can't do) but I am not 100% positive if appletv d...
by signcarver
Sun Mar 10, 2024 6:29 pm
Forum: Development Support
Topic: Recording metadata - TPeterson
Replies: 32
Views: 13928

Re: Recording metadata - TPeterson

Yes you need the dvr engine running some place that has local access to that folder and set to look there as that is what serves the content to the app.
by signcarver
Sun Mar 10, 2024 3:24 pm
Forum: Development Support
Topic: Recording metadata - TPeterson
Replies: 32
Views: 13928

Re: Recording metadata - TPeterson

the app looks for a recording engine... the engine looks at folders it is told to look at in hdhomerun.conf file or registry.
by signcarver
Sun Mar 10, 2024 10:26 am
Forum: Development Support
Topic: metadata - setting own ImageURL
Replies: 3
Views: 102

Re: metadata - setting own ImageURL

only easily if such series or movie is airing in the next 2 weeks based on your channel lineup (assuming you have dvr access, not just utilizing an engine just to serve other recordings).
by signcarver
Sun Mar 10, 2024 9:06 am
Forum: Development Support
Topic: metadata - setting own ImageURL
Replies: 3
Views: 102

Re: metadata - setting own ImageURL

It used to work long ago but then I think the app changed to just get the image for the entire series rather than the image for the individual episodes and I believe that image for the entire series is obtained from retrieving the data for the series from SD, but there is a slight chance it may retr...
by signcarver
Sat Mar 09, 2024 10:30 am
Forum: Future Product Discussion
Topic: SiliconDust
Replies: 15
Views: 4227

Re: SiliconDust

If one is used to the old site, I see that might give such impression as the consumer is just hdhomerun and then one has commercial, support, and buy. There us no choice to take one to another region to see what is there until in shop (buy).so I'm not sure what shows up in other regions pages but in...
by signcarver
Thu Mar 07, 2024 8:19 am
Forum: ATSC 3.0 Forum
Topic: Encryption
Replies: 257
Views: 42050

Re: Encryption

Not the "goal" but a possibility.
by signcarver
Mon Mar 04, 2024 9:04 am
Forum: ATSC 3.0 Forum
Topic: The first HDHomeruns ATSC 3.0
Replies: 1
Views: 370

Re: The first HDHomeruns ATSC 3.0

The kickstarter one is not a flex as it lacks a usb port to attach a hard drive so for dvr you would need another device to record to (flex, scribe, servio, pc, nas.. ) The other main difference is power supply as a flex may need a bit more to power that attached drive but a spinner should have its ...
by signcarver
Sun Mar 03, 2024 10:20 pm
Forum: HDHomeRun Hardware Setup & Troubleshooting
Topic: 2nd HDHomeRun Prime
Replies: 1
Views: 132

Re: 2nd HDHomeRun Prime

You should ALWAYS get the card properly paired but with most areas of comcast using moto/arris cards, typically you will get all but the premium copy once channels without it being properly/fully paired in such markets but such can eventually cause other issues. In cisco/sa/technicolor markets I wou...
by signcarver
Sun Mar 03, 2024 6:37 pm
Forum: ATSC 3.0 Forum
Topic: Encryption
Replies: 257
Views: 42050

Re: Encryption

I won't directly say since its removal somewhat states we probably shouldn't be taliking about such but nickk had made a post that for me is on the start of page 2 and a few posts later someone had quoted that section.
by signcarver
Fri Mar 01, 2024 5:52 pm
Forum: HDHomeRun Software Setup & Troubleshooting (Live & DVR)
Topic: Samsung UN65KS8000 audio
Replies: 3
Views: 214

Re: Samsung UN65KS8000 audio

I believe the k series should work with ac3 via hdmi... earlier models I wouldn't count on it but I know the m series does but i cant guarantee it in the k as that was released right around the time it changed. This typically only comes into play with most roku's (a modern ultra is often the excepti...
by signcarver
Fri Mar 01, 2024 2:52 pm
Forum: HDHomeRun Software Setup & Troubleshooting (Live & DVR)
Topic: Recording on NAS or USB drive
Replies: 11
Views: 499

Re: Recording on NAS or USB drive

It can be a permissions issue but what does the status say? (should be pointing to the new location) and also look at what rikd mentioned which is something I missed that you said you did... the config file to be modified has to be the original one... not put someplace else. I would start out by mov...