What drive and if it was a bare drive that you provided enclosure/dock, what enclosure/dock.

First off it only supports the first 18TB so it probably shouldn't be larger than that. I believe there is also a requirement that it only works on the first partition and I've seen a few drives that hadn't ...

make sure you post what app version you are on (I doubt firetv app store is on the latest as it usually takes several more days than google play store but you may have sideloaded latest). Just the other day both were pulling in 0603... google finally gave me 0606 on Thursday night and I was able to ...

Make sure you are connecting from the correct subnet. My suggestion would be from a PC rather than phone. I also personally always perform the scan directly on the device's web page... that link should have worked assuming that is your Scribe's DeviceID but some don't have mdns available on their ...

Firmware or app... the device should have had its firmware updated over a month ago... though some have reported some issues right after that as firmware issues, there haven't been enough to really say it was firmware (we would be seeing many reports each day here if that were the case)... many ...

I didn't have time to really look at your script or try to run it (on phone on a bus at the moment) but typically in windows i believe such would be $null (such as >$null ) and i think in the case of invoke web request there is also an out-null available.

Since kyl416 stated rabbitears has some incorrect information I can't say for sure but from rabbitears it looks like nearly all the display channels for woms has the same 29.1 number. And the way the modern method of tuning works for the scan as well as many tv's it may not add the additional 29.1's ...

Laat two posts seem to be a different issue than what this thread was originally about.

There was a recent issue with a recent android release related to whether or not the client device had native ac4 support rather than the cloud transcoding service (not sure of your phone but the chromecast and ...

I know if one does a Google search for HDHR5-4K-DEV-UPGRADE the shop page for it should come up and though it appears to allow one to add to cart, I'm not 100% positive they are still offering such. And i guess there is a chance such officicially works only with hdhr5-4k rather than hdfx-4k but I ...

Which app version... mine pulled in 0603 and has done that and couple of times on both chromecast and old onn (home and firce stop app usually clears it rather than comlete reset... haven't seen such on devices with more ram yet. Ni j had mentioned in another thread that 0606 was out but I haven't ...

Splash screen would be part of app not part of flex 4k.

Note that if you saw both the flex and the record that means you have another engine some place.

What do you mean by isnt seen? What you posted before shows that it was seen.

That info seems to be correct for your new install...

There is no pointing to a specific storage location... various installs of the engine can be set up for a specific path but which engine is used is up to which one has the most space. A drive attached to a flex via USB will need to be formatted ...

Works fine here on 8 android units I tested.

How many hdhr's do you have? It will always skip live tv if there have been changes in detected devices since last launch. Also if you toggle between new features or not may also go back there but often it will remember the setting to start with. Do you ...

Not only in the app... as it is where the app gets the channel lineup info from... the lineup.json