People have reported many problems with amd processors and win 11. Last I heard it may be a month or two before it is hopefully properly fixed and "fully" functioning (there have been reports one part of the fix should come October 19th but this past week MS issued an update that made thin...

Typically when I had such issues with wmc, it was with the recording drive and I fixed that by moving the buffer to a "dedicated" drive and would need to replace that drive every couple of years. In my case such showed up pretty quickly as I had a dozen tuners but my family and friends (an...

Make sure you have a DLNA server running on that nas as that is the mechanism that SD's NAS install uses to find the NAS. personally I would use demonrik's package for the asustor.

They would have to reset your entire history and would need your DeviceID... they may wish a support ticket open coming from your email address to do so though NedS might do so from here by verifying public ip of post to forum coming from same ip as device.

Easiest would be my.hdhomerun.com/discover Depending on your isp, you may see other devices as well. I always manually configure the port for the dvr so I know the port I don't believe in letting a device on my network without knowing it's ip but the dvr you also need the port as typically it isn't ...

The tuner will add 100 to the channel number if it is ATSC 3.0 that way you can choose either as there are many clients that won't support ATSC 3.0. Prior to that behavior, it would only add the ATSC 3.0 channel as the virtual channel numbers are the same. An ATSC 3.0 capable TV will typically only ...

It should update a couple of times a day but often such change can take 48 hours to get around so they just aren't pushed (provided the guide provider was informed it can take up to 24 hours for the change to be available to what they send out to their "partners" and up to another 24 for t...

The way channels are supposed to be added by the scan is resolution then by signal quality... codec can also be in there (I think it is between resolution and signal quality) but I haven't really seen it as I haven't had two of the same virtual channel number use different codecs other than ATSC 3.0...

You need to add the tuning parameter (usually ?tuning but if you had previous parameters such as ‽show=all, it would be & rather than ? as only the first gets ?) Note a prime with TA such won't work as with a TA the frequency may be switched. Also note use lineup.json (you typed a / above rather...

You can't and generally must pray that such gets pushed out in time (typically I wouldn't count on such that quickly) I would however go an extra step and set whatever is on at that time to record and add a few hours padding, you would then need to remember the name of that show to find it. Then you...

Just note that even though dvr activation can work through Firefox. The "regular" my.hdhomerun.com page removed the displaying of your tuners/record engines on that page (they probably should have put notice of such there and provide a link to hdhomerun.local and even better to "Devic...

27 seems up again (though power levels indicate south mountain). 12.1 (112.1) still bad (titan logo). I think a rescan may be necessary again.

For all that are having trouble, are you in a MESH network? I've been fighting this for a week, and finally found your notes. From Spectrum's modem I have a Google WIFI mesh system set for whole house network. I don't use the WIFI network provided by Spectrum. If Google is filtering out some traffi...

27 doesn't seem to list any streams available on any plp right now. Also of note based on power levels it seems shaw butte may be down as my strength is closer to what I see for stations from south mountain and plp0 rather than symbol quality 100% a few seconds then dropping to 0 briefly seems to be...

Often the first symptom of a failing power supply is that one particular tuner is consistently lower than the others or that one or more tuners have issues when more than one is used at the same time. Occasionally some may find that just moving it a few inches away from something causing interferenc...